I'm having a lot of trouble maintaining a stable overclock on my RTX-2080TI. I've read this thread: https://www.reddit.com/r/nvidia/comments/9jzbon/2080_ti_owners_what_are_your_overclock_settings/ And people are reporting: +175 core (on top of the factory OC) and +760 on the memory. Evga XC Ultra +165 core/+700mem,…

Well I finally decided to sit down and redo my ram cooler. I made one previously that clipped onto the top and bottom of the dimm slots, but I was unhappy with it. This time, I decided to use m3…

A newbie question: Did i need to manually set up DRAM Frequency on “BIOS” after enabling XMP profile or leave motherboard to [AUTO] on it? I suspect that the motherboard is setting the wrong value in auto mode

It's a Ryzen 4600g. Pretty sure the base clock should be 3.7 MHz, but that's how the PC boots. And the bios and legacy and doesn't even have any overclocking features I can access at all. Which leads to system…

2 years ago I "upgraded" my PC that I used for hard gaming for about 9 years. I basically changed everything besides an SSD, which died some months ago, the GPU (more on that later) and the PSU. I previously…

5950x curve optimized +200Mhz, BCLK 102.8Mhz, B-DIE 1.4v 3839Mhz 16T, FCLK 1919Mhz 1:1

Hey guys, noob here Had a faulty 13900K and got replaced with 14900K with warranty, when running Cinebench I get this score in multicore – https://preview.redd.it/fskzezv9sp6d1.png?width=651&format=png&auto=webp&s=b9578b72260bd537646212a9c28b8649c118c64e temps are at 100 almost constantly during the test run, is it possible the…

Using previous default values and -30 on the optimizer proved unstable. Testing new values at -25 with the CO. So far it is running cooler with the current settings applied. CO allows you to apply the settings in the bios…

Curve optimizer lets you run in 3 modes. Default, PBO or Auto OC. You are only offered the PBO mode under advanced settings when running the Curve optimizer. I first tried Auto OC with the Curve optimizer and that resulted…

It's a gtx 1080 ti and i have tried it in two different computers and still same issue

Hi, I know next to nothing about ram overclocking. I tried to do some research and do some carefully, but I would like suggestions. What I have done: Turn off RGB, based on XMP profile. I set the tCL,tRCD,tRP and…

Hi All, Just wondering if the hot-spot on my GPU is too high. After a few hours gaming you can see the max hot-spot temp is 99. Below are the HW recording