Just installed the Gigabyte Aorus Master 5090 last night, ran steel nomad using hotfix driver 576.15 and scored ~14700 with no OC, was able to push it over 15000 with an UV and +2000 memory. Well I decided to test…
Any tips for getting tighter?
Hi, I am using an undervolted profile with an overclock created in MSI Afterburner for my RTX 4070 Ti. I have it undervolted to 1.04V with a +150MHz core clock offset (around 2880mhz). I also have an FPS cap set…
As the title says I'm trying to get 8000 stable I'm on a 14600kf z790 mag max tomahawk wifi i got 7800 stable thru tm5 and y cruncher but I want to go for 8000 purely for the photo of…
what can i do further more to lower my latency it gets 65ms on aida extreme any idea
Is this the correct version and download link for Testmem5? https://github.com/CoolCmd/TestMem5
Lately I was feeling bored, so I decided to find the maximum offset at each voltage point from 800 mV to 950 mV. For testing, I used several OCCT 3D Adaptive tests for over 5 hours, Topaz Video AI Prob4 2160p for…
Results after flashing playing around with the MSI Curve Editor and flashing the PNY 5080 OC bios onto my non-OC card. Currently voltage limited and cant push past 3300MHz on the curve bios with 1.040V so I'm calling it a…
1st slide stock 2nd slide undervolt @ 2992MHz + 950mV (stable) and +2000MHz memory clock. This isn’t a problem, since my undervolt performs quite a bit better than the stock settings, so nothing isn’t working as it should, I’m just…
Benchmark though OCCT. I undervolted all cores to -33, but I know I can go further. Going to -40 did result in crashes, but I saw no meaningful performance difference from -30 to -35, so I just split the difference.…
see pee you:14900k mobo: apex encore z790 using liquid metal on the cpu. in my experience the tape ended up being more useful when cleaning the stuff again, it jumps around like crazy. i'm not too worried about it leaking…
Thoughts on timings? Can i squeeze any more performance out of this without increasing voltage any further, or can anything be changed to lower voltage without losing performance? This is a 48GB M-die with 1.35V XMP at 38-48-48-128