Tell me, please, I configured the BIOS for the first time, do I need to change anything? I changed vdd_soc from 1.250v to 1.200v, also changed vdd, vddq, vddio from 1.400v to 1.350v. I also configured Curve Optimizer -30 for…

Hello, I had to delete my last post as I included a picture that wasn't my results lol, so here is a before and after, all I've done is take the mobo battery out and apply the same/ similar settings,…

High latency I think

Ada police 🚨 this isn’t stable 😂 It’s just interesting to see how far one of these chips can be pushed and all within sensible operating temperatures, average 59c in cpu profile. Been experimenting with PBO vs all clock OC.…

Hello all, it wont let me upload the new picture to the post, so ill do a big post with the new results on, all ife dont in the end is power down the mobo by removing the battery and…

My 7700 was running a little too hot for my liking and I decided to undervolt it. So I followed the tutorial on YT. Ryzen Master > Curve Optimiser > Per Core > -30 > Start Optimising. After an hour…

Been messing around with PBO2 Tuner on my 5800X3D, and I keep seeing people say -30 on the curve is the sweet spot. Well… mine is perfectly happy at -45. Stable, temps are fine, benches look great. Starting to wonder…

I've tightened my tRCD and tRP to 36 from 37. My previous timings (28-37-37-65) held stable at 2/3/1 nitro mode with 9 hours of Y-cruncher SVT and 200 cycles of TestMem5 Ryzen3D Anta777 for 10+hours. Due to Aida64 being inconsistent,…

Hi all, I need some advice. Every time I enable XMP in my BIOS, I crash Windows in a matter of a couple of minutes, or the system won't even boot. I'm not into overclocking – my knowledge extends only…

been tuning ram the past few days. CL28 posts, but won't pass 5~ iterations of VT3, and I don't want to go past 1.3vsoc. CL30 MAY be stable if I tune it better, but it failed after 30 minutes of…

Is there an issue with my hardware somewhere that I should be trying to identify? Was testing OC that comes with Gigabyte Aorus Master 5090, around halfwaythrough 3dMark Solar Bay through it dropped off and never recovered. At a bit…

Hi avid overclockers! Please help me  (on somewhat a continuation of Need a little help – 8000M RAM with 9950x3d!) TL/DR: I can get 8000MT/s memory stable until I try to use my GPU… I'm only able to run EXPO/XMP…