Hello guys I am running the memtest86 at this moment. I am no facing any issues when using windows, or even benchmarks, but several direct x crashes when running warzone. So far, I have 2 errors under test 7. My…

I wanted to share my current settings in case anybody else has been struggling with matching tPHYRDLs between sticks and/or disabling Gear Down Mode. To match tPHYRDLs, I had to first of all bring my VDDQ/VDDIO voltage up to 1.4v…

Anything to improve ?

Fiz um overclock no meu 3 5300g, porém fui olhar no HWinfo e apareceu a temperatura máxima entre 105 e 115 C em um ou outro VRM de vez enquanto, normalmente a temperatura do VRM não passa de 60 ºC…

So this is a follow-up to the CPU cooler I mounted on my GTX 960, that one dropped temps like 10+ from 40 degrees and made the whole thing look cursed but effective. Naturally, I wanted to try it again…

hello before something else im not trying to overclock my gpu i want to fix an error. i have the amd predator oc 7600 https://www.techpowerup.com/vgabios/261290/261290 rn, this graphic card have a very weird problem because it reaches a clock speed…

CPU runs very hot, like 45°C in idle with a Noctua NH-D15. I did a test with Cinebench 2024 and it reached almost 90°C. I set the settings people advised me with PBO +200MHz and CO -20.

I've seen a few benchmarks showing near 70k for read. A few of my subtimings could be tightened but any advice why my benchmarks are way off higher scores. Memory is gskill A die hyinx, 2x 16gb sticks Thanks

Hey, i know ddr4 is getting old but i managed to grab a beast b die for cheap, and replaced my 3600mhz cl16. In aida64, the latency dropped from 64ns to 57. For an x3d chip i think its a…

I didn't do anything special for this result, just followed a youtube guide a couple weeks ago (shoutout ImWateringPSUs) and decided to see where it was sitting! First time ever oc'ing, after almost a decade with my trusty stock settings…

Hi everyone, I’ve an issue when trying to playing games after i tried to undervold the card to safest voltage. This green and white flickering bar is only on the left side of the screen and does disappear only if…

Hi hi! I've used a dc current clamp to measure the current on each pin (cable) of the cabled 12v 2×6 cable I'm using for my gigabyte 5090. I was happy with the initial current distribution, but annoyingly after having…