I just updated my windows 11, chipseat drivers and GPU driver. I tried Using the DDU and re-install the old gpu driver, re-install the old Chipset drivers but it freezes. PC specs: RTX 4070 ti Super, Corsair vengeance 6000mhz cl36,…
I delidded my 9800X3D and I’m still doing some tests with the heatspreader, direct-die, and the stock IHS. Temperatures were reaching 90+ C in Cinebench 2024, basically my temperatures got worse. So I grabbed my caliper, it’s the straightest thing…
Hi everyone, I am worse than a beginner when it comes to overclocking in general. I got this RAM kit during a sale without realizing that the AM5 cpus have a sweet spot at 6000 MT/s Cl30. I also heard…
Thoughts on this? I am 90% sure this is hynix M die as my trfc won’t go lower than 470 without causing issues. CL28-36-36-126 (tras is useless on my 7800x3d) Trefi 65535 Current VDD: 1.50V, could probably go lower honestly
it is not normal, my ryzen 7 9800x3d It only uses a maximum of 50-60W under full stress. Only PBO and Expo are enabled in the BIOS.I even replaced the processor and RAM with new ones.What's most interesting is that…
Hey guys, i have a trouble. My working setup for livestream graphics sometime act weard (not performing well enought with graphic it should) . I was trying to check it with benchmarks and i got low score in time spy…
Twisted the direct-die-mate about 50 times until the cover fell off when I took it out Scraped off the largest chunks of compound on the die with a plastic scraper Added be quiet! DC2 Pro to make it easier to…
I heard that 6000/6400 is the sweet spot for ddr5 ram. Should I start tightening timing or try to increase bus? I'm running 1.35v on vdd/vddq, 1.2 vccsa, 1.35 vddqtx.
Just finished my first round of stability testing on an undervolted 7700 with a low-profile cooler. Looking for feedback on whether these settings are actually stable or if I'm experiencing clock stretching. Specs: CPU: AMD Ryzen 7 7700 Motherboard: Colorful…