Should I switch from dual-rank RAM to single-rank RAM (64GB to 32GB)? I'm currently overclocking 64GB on CL26. Will switching to 32GB on CL26 improve my gaming performance?

If yes, would buy it from friend second hand, if no, would get brand new.

Hello, Before formatting my laptop, adjusting the "Turbo Boost Short Power Max" value to 35 W would automatically set all PL1 and PL2 values to 35 W. However, this behavior has changed. As shown in the image, the "PL1 Power…

I’ve always seen stretched res talked about in CS/Fortnite circles, but not as much for CoD, so I wanted to test it properly. Used the built-in CoD benchmark instead of random gameplay clips and compared native 1440p vs 1720×1080 stretched.…

Any advice on voltages or timings? Theres a heat wave right now and I don't have ac, prolly 25c room temp. Even with a fan the dimms climb to 50 in like 10 mins of tm5 so I haven't stress…

I had a great 14900ks (Sp107) which i daylied with 8400mts CL40 , undervolted and limited to 1410mv and it still broke. I was so satisfied with this chip. 8400 was a lot of work. Rtts, Training, DQs all set.…

A colleague here in the community posted how to find this completely hidden timing, so I took the opportunity to implement it in my setup and lower the VDD and VDDQ of my memory a bit.

Included two aida pictures, the first was with 1.0v vsoc which performed decent though setting vsoc to 1.15v seems to produce better latency and write speeds. Unsure what to do with tRAS, keep it at 126 or would y'all suggest…

Original post: https://www.reddit.com/r/overclocking/comments/1tn0jmd/tips_and_advices_searches/ Got my first overclockings working! CPU p-cores: 3,7 -> 5,6Ghz | e-cores 3,2 -> 4,9Ghz (-0,01V) GPU core: 2832 -> 3150Mhz |VRAM: 14000->16000Mhz RAM: 7200mhz cl34 -> 8000mhz cl36 All stable and quite cool. HWiNFO of 1,5h…

I want to hit 5.6 GHz all core in every single task. If I can do that, I wanna try 5.65 GHz for a 200+ MHz OC above advertised spec. Unless my motherboard is just garbage. Load Line calibration is…

Clean Windows 11 Pro install, GHelper (0.251) and AMD Adrenalin only. I know the laptop was running at 93w since my UPS showed a total power draw of 180 to 185w. Ghelper settings, Full Send Profile: 93/93/93W, max fan speed,…

All tests conducted with a fixed core ratio of 5.3ghz for both ccd’s. Wanted to test the new rad in my loop, used to immediately shoot over 80c at fixed core ratios over 50 and now it doesn’t 🎉 Spent…