All tests conducted with a fixed core ratio of 5.3ghz for both ccd’s. Wanted to test the new rad in my loop, used to immediately shoot over 80c at fixed core ratios over 50 and now it doesn’t 🎉 Spent…
9800x3d on LF3 pro AIO with PTM7950, currently on a very quick and easy -15 all cores co, fmax +150 and eclk 101.9 (i will deep dive per core co, eclk and curve shaper once i finish testing many more…
Hi everyone, Recently got a 9850X3D and decided to try and push my G.Skill 7200 CL36 to 8000 CL40. It is stable with this config so far but I know a lot of the timing needs to be tuned. I…
Some colleagues asked me to run the VT3 test for more than 2 hours to see the real stability, and here are the results!
9070XT: Just for fun (Unstable). Second set = Daily Driver (-20% PL. Stable)
EVGA SR-2 Classified for only $300…
I have never overclock anything before and watch a total of one YouTube video on how to do it and they say to max out power limit max memory clock since it can handle it and add core speed by…
Today in peasant land my🍆 grew 2 inches
I overclocked my ram cpu amd gpu Gpu:rtx 3060 8gb (overclocked memory to 2000 mhz and core to 1960 mhz)also undervolt to about 980mv Cpu:ryzen 5 5500 (overclocked to 4.4 ghz using PBO) Ram: ddr4 3200 mhz (overclocked to 3600…
TL;DR: maxed out negative offset on CCD1 and basically -30 on CCD0. Despite all evidence to the contrary, that cannot be stable right? I must be am missing the right stresstest? ———– OK, last post got me no comment on…
I went through a bykski, icemancooler, and now a deltamate. The deltamate far exceeds the other blocks in performance https://www.3dmark.com/sn/14095083
What would I need to do to surgically upgrade to 6400MHz?