I'm currently at 950mV with 2800MHz + 1000MHz on the memory, and I'm looking for slightly better performance than stock but with lower power consumption. Should I stick with these settings? Or is there a better way to configure it?…

Hi everyone, I’ve manually tuned my 64GB (2x32GB) G.Skill Trident Z5 Royal kit on an ASUS X870E Apex with a 9800X3D. These are my current timings (see attached photo). Is there anything else I should tighten or optimize, or am…

What are your go-to requirements regarding the AIO coolers. Like shown on this video, some coolers can be very noisy regardless of cooling peformance. I'm also wondering, whether the more expensive coolers are any better in terms of pump noise.…

After tens of hours of testing with anta777 absolut and y-cruncher VT3, I've finally arrived on this config for my RAM. Quite happy with this result, considering it's lowly C-Die. I think I got a very lucky bin to have…

This version of the processor is configured incorrectly by default, pl1 and pl2 are at positions 120-160, and temperatures are 90-100 in games and in virtual machines, I took and removed 30 watts from pl1 and pl2, (pl1-90, pl2-130) and…

( If you don't want to read about my benchmark, i have also asked a question about upgrading my CPU&Mobo at the bottom of the post. If you have any advice on that i would really appreciate it!) Hi, as…

I was curious how my everyday settings compared to my overclock settings. Really not a bad difference. Do you guys run drastically different profiles everyday vs OC? Or do you try to keep them close? https://www.3dmark.com/compare/sn/12755953/sn/12755819#

Hey guys, I have a MSI B459M pro vdh max motherboard and I'm hesitating updating my bios to the newest beta update available. Why ? Because of the line "Improved security by updating TPM firmware for better game compatibility". So…

A few days ago I'm trying to have the minimum possible latency and stability for cs2 with my CL 30 Vengeance I don't understand much about this, but they would help me a lot if there is any way to…

As a follow up on my previous post. ZenTimings Pretty happy so far. Testing with 1usmus, anta777 extreme and absolute is stable. Mem temp stays at 50C. While gaming, with a hot gpu, mem temp is around 40C. Upping fclk…

So I recently upgraded my rigs mobo and CPU. I went from a Z690 Maximus Extreme and 12900ks to a X870E Glacial and 9950x3d. I am lost when it comes to OCing the CPU. I have been on Intel CPUs…

Hi all, thank you in advance for your guidance. I am working with a Gskill CL26 6000 64GB SK Hynix A Die kit and I was able to get it to a nice stable CL26 6200 2200 FCLK and currently…