Ive never seen this happen before. Basically I found Techpowerup have a +14% voltage limit version of my bios (capped at +4%), otherwise identical: My Card: [https://www.techpowerup.com/vgabios/231767/palit-rtx3090-24576-210310](https://www.techpowerup.com/vgabios/231767/palit-rtx3090-24576-210310) Similar/same card with 114% power slider limit: [https://www.techpowerup.com/vgabios/228329/palit-rtx3090-24576-201118-2](https://www.techpowerup.com/vgabios/228329/palit-rtx3090-24576-201118-2) ​ With the 114% version…

RAM: ADATA XPG CASTER RGB 32 GB (2 x 16 GB) DDR5-6000 CL30 Memory Results: https://i.imgur.com/MxxfqJK.png all I did was select the EXPO profile

Scores on Cinebench 2024?

Rtx 4080 tuf Locked at 1v with stock frequency 32gb 3866mhz cl14 ddr4 (24hr occt stable) (24hr anta777/1usmusv3 stable) Rog strix b550f Samsung 2tb nvme Ryzen 5700x pbo co custom core under volt (4850mhz all core) 850w Seagate psu 4k…

Hey everyone, I recently got a 13600KF to pair it up with my RX 6800 XT and it was not at all performing as it should. I thought it was me messing with the BIOS so I cleared the CMOS…

Spend a lot of time with OC’ing RAM and the target achieved. I have an MSI Z690 carbon Wifi mobo. I built the PC in March last year. I’ve made several test but RAM was stable only on 6000 Mt/s.…

A GPU sacrifice a day keeps the OC GPU gods away ;D | RX 570 Nitro with a very dead core

Talking about this famous guide [https://github.com/integralfx/MemTestHelper/blob/oc-guide/DDR4%20OC%20Guide.md](https://github.com/integralfx/MemTestHelper/blob/oc-guide/DDR4%20OC%20Guide.md) My sticks became stable on that guide but after a while I kept getting blue screen “memory\_management” error so I went back to XMP and never had issues Now I have had some more…

Hello people, I also have this old processor and I want to overclock it. Its basic speed is 3.5ghz but it is made to reach 4ghz with turbo boost, the thing is that this has never happened to me and…

Reached 4ghz on 4x8gb sticks, kinda insane for budget ram

I’m not sure if anyone can help with this one. I updated to “PRIME Z690-A BIOS 2703” and I can’t get my PC to boot with the settings from the previous BIOS version. I’m not too interested in spending another…

Is that how I am supposed to OC and Undervolt?