So, basically after a while i decided to try one of those contact frame, picked the ThermalRight one + Noctua NT-H2 paste. Cooler is a iCUE H150i RGB ELITE in both cases , CPU is running HT off. Ran Linpack…
26k GPU on a shunt modded and water cooled Scar 16 4090/13980hx
I am confused which one is the actual power that my CPU draws? CPU dances like crazy from few Ws to 200+, while the CPU package is more consistant, which can be seen on the graph.
Do I have to add more? And could have this caused my temp problems
So I tried to use a 1333mhz ram stick but it didn’t work I tried to change the jumper position, and even removing it but nothing have changed, the bios doesn’t even allow voltage changing or more than 800mhz and…
Hello guys, i have these rams 2×16 gb Gskill Ripjaws V Black F4-4000C18-16GVK. Can i tighten anything on it to make it faster? I mean can i keep 4000mhz with flck 2000 but mess with the timings a bit for…
I am pretty sure xmp is on but in ccpuid cpu z my ram is showing 1200MHz not 2400
Isn’t this Mushkin Redline Stiletto 64GB 3600 CL16 RAM kinda godly? Almost same as B-die performance but 2x the capacity.
I’ve been running heaven benchmark for a while now, and I landed on +1700mhz memory clock and +200 memory clock at about 62c consistently with no crashing or artifacts. Should I keep pushing or just leave it where it is
RTSS is completely non-functional and has ui bugs. Already tried re-installing. RTSS was previously functional but no longer works at all
​ https://preview.redd.it/br2hkrgkxsmc1.png?width=1312&format=png&auto=webp&s=aedb650903ff48e75f6332d4377aaf4e3ed9a656 Time Spy Result: [https://www.3dmark.com/spy/37106190](https://www.3dmark.com/spy/37106190) Stock BIOS P-Mode. Clock frequency: 3,045 MHz. Memory clock frequency: 1500 MHz. Average Temp during test: 61 °C. Anything over +225 on the core clock will result in artifacting or BSOD. Memory slider is…
14900KS delidding. Detailed info in the comments.