Built a new PC very recently and I'm struggling to get my ram to run at advertised timings. Here's the kit My set up is: MSI X690e Carbon Wifi 7950X3D (fwiw before "get 7800X instead", I do make good use…
I have these two kits in my possession but I don't know which one to keep and which one to sell to recover some money. Both kits are 3600mhz 32gb (2x16gb), one from Corsair and the other from Teamgroup. https://i.imgur.com/NdhlKQD.png
I have the Corsair Vengeance 3600MHz CL18 kit which seems to be a Micron E-Die. I was able to OC this kit pretty high to 4000MHz CL16 and all tests didn’t show any errors after hours of testing. (TestMem5 with…
This is on an Asus TUF Z790-Wifi Plus Mobo on the latest BIOS update. Any idea what the fix is?
someone correct me if I’m an idiot and spreading mis info, but omg tfaw makes a difference, in between these SS, 34 to 24 tfaw got me from 147 to 128 in test speeds as well as a decent read…
Why does HWinfo report thermal throttle on such low temps?
https://valid.x86.fr/4rn2rz Check the link for more detailed results
Hi all. My 14900k has a minimum core VIDs of around 0.7v, I can’t figure out how to just change this minimum to something like 1v. And its currently unstable at 0.7v minimum. Could someone please specifically tell me how…
Hi all, so I have been using my 14900k without issues for the past month, but today I decided to try SVID behaviour ''typical scenario'' instead of ''intel's fail safe''. After doing this, my temps were way better, but sadly…
Ryzen 7 5700X running with Curve Optimizer and Auto-OC. Temperatures: 23°C idle, 50-55°C in gaming and with a small cooler at 15% fan speed. However, PPT, TPC, and EDC are extremely high. I didnt touch anything. But the CPU runs…
I see a lot of posts about the silicone lottery, and I'm wondering if maybe I've won. As far as I can tell, I have an MSI Ventus GeForce RTX 4070 2x OC (I bought a pre built PC and…
First RAM overclock! (Crucial’s DDR5-4800) How’s it looking? Two hours in of normal use and no errors. Are the voltages/timings fine, or could I tighten them a bit?