Hey everyone, I’m looking for some validation or insight regarding the behavior of my Ryzen 9 9800X3D while tuning PBO/CO. The system specs: CPU: Ryzen 9 9800X3D Cooling: NZXT Kraken Elite 360mm Motherboard: ASUS ROG Strix B650E-E (latest BIOS installed)…
PC Specs: Radeon RX 7700XT Ryzen 5 7600 Corsair Vengeance 32GB DDR5 (6000Mhz with EXPO) MSI B650 Gaming Plus Wifi Windows Version 22H2 (OS Build 19045.6466) Hi, im am not really a experienced overclocker but I did a lot of…
I managed to get it stable at 6200 MT/s like this, but I'm completely stuck at 6400 MT/s. I've already tried an IOD-CCD of 1.14V, VDD of 1.70V, and VDDQ of 1.60V… dk..I'm pretty sure I don't need voltages that…
ASUS ROG Matrix RTX 5090 tested at 800W: 60% higher price, 10% more performance, 30% more power draw than average RTX 5090
I’ve been using an EK 360mm AIO for about three years. I bought it as B-grade with a one-year warranty. Recently I started hearing a bubbling / gurgling sound, so I assumed it needed cleaning or a coolant change. Last…
How's my timing on my KLEVV Bolt V DDR5 6000mhz CL30? Tested on OCCT, TM5, and Memtest64. pretty stable, no errors I know I can raise the voltage a bit to push 6200 or 6400. I wanted to keep the…
I don't know how to oc my cpu I clicked on the active oc tuner from disabled to manual Three options appeared Cpu current limit Cpu temp limit Gfx clock frequency I'm not sure what does the cpu current limit…
Hello, I've been more or less happy with the stock settings with my eGPU Radeon RX7600 XT then I got a bit greedy and started overclocking as far as Adrenaline allows it. With 20% additional power I had a total…
First of all, thank you very much for telling me values that I can put in my ram memory, now I would like a second opinion to know if I can improve things further, I attach a before and after…
Low temps even with crazy volts couldn’t take any voltages lower or would throw errors and somehow actually run to almost 50C when I tried lowering voltage. Was weird.
My RAM kit is rated at 6400mt/s, which is why i'd like to use it at that. This works and doesn't have any errors with "UCLK = MEMCLK / 2", but rising UCLK up to "UCLK = MEMCLK" causes errors…
Hello, I am new to the world of doing oc to ram and I honestly don't know where I can do oc to mine or what values to set, can you help me?