Specs: • CPU: Ryzen 9 9950X3D • Motherboard: Asus Rog Strix X870E-E Gaming WiFi (latest bios, 1804) • CPU Cooler: Lian li ga II LCD 360mm • RAM kit: 64gb (2x32gb) G.Skill Trident Z5 Neo RGB DDR5-6000mt/s CL30-40-40-96 1.4V AMD…
I get usb keyboard disconnects for few sec in games and i read it can be from unstable ram. I only use xmp profile 1 6000 mhz cl30 1.4 v Soc is at fixed mode 1.2 load line calibration 3…
Reached the peak of 6400 for my system. Never seen 500+ GLFLOPs in Linpack so that was pretty sick for me. Interested to seeing what everyone else gets in these benchmarks. 6400/2133 Fully tuned timings and related settings. Nitro is…
Thanks for the help guys! In the past, I’ve always just copied other people’s values before and hoped for the best but I never scored well on benchmarks and there was noticeable performance issues. I spent 3 days manually tightening…
14900K Asus B760-I. Kingston Fury DDR5 2×16 (KF560C36BBEK2-32). OC to [6800CL32 @ 1.42V](mailto:6800@1.42V). Ran 6 cycles of TestMem5 (1usmus_v3) with no error. I will run longer tests to check for stability. I have followed Buildzoid's timings and tips. I cannot…
Managed to pick this up for 166! What are the chances I could push it to CL34 or even 32? Planning to keep it at 6000 MHz for 7800x3d.
Finally did hit the 10k on steel nomad with 5080 AORUS MASTER Core +310 Mem +3000 Power Limit 125%
Looking for help with benchmarking scores. I know it’s synthetic, not important, etc. I just like it. Been doing okay with Fire Strike Ultra since the weather is cooler and I can flood the room with outside air. Temps are…
These are the current values I have in my RAM. I don't know if I'm missing something, since I've seen reviews of these modules where they're set to 6600, but if I copy their values I have instability problems.
Hello, i have a crucial ballistix ddr4 2x8gb 3000 xmp, that i had this old setup at 3600 https://i.imgur.com/5UiMx19.jpeg for 3 years that i thought stable but maybe it was not. Last months i started to get too many system…
I want to overclock my Ho 25x, which is 144Hz by default, to 200Hz or even 165Hz using a CRU. It works fine, but the monitor displays a message that the signal is out of range, even though it works…
Context: May 2024 i bought this 4070ti Super because my old 2070 couldn't hang in 1440p anymore. For a year or so i was happy with my stock performance, but lately a crap ton of games don't even run at…