Does anyone have an idea as to why my P core speeds stay at 4.2ghz (they’re set to 5.5) mid bench? I get a r23 score of 21500 still but i’m not sure if the speeds are how they should…
Im trying to make sure i dont have any issues with my 9800x3d in the long run so i set my vsoc to 1.15, but when i monitor it in hwinfo it spikes up to 1.17. Is this normal? im…
Dear Overclocking community, I recently ran into game performance issues that led me into investigations of my memory settings. As I have very little knowledge about this topic I have found a guide from Buildzoid that seems to address relevant…
– Upgrade from B450 to B550 motherboard resulted in unstable 4000Mhz Sk Hynix kit which was working fine on B450 – 3800Mhz did not post at all, no matter what I tried – So I decided to plug in my…
primary timings can't be lowered more regardless of voltages. should i tweak anything else, or finaly sit down and enjoy? my latency is at 56ns.
CPU: Intel i7-13700K with -0.100V undervolt (LLC HIGH, AC: 55, DC: 55 mOhm) Motherboard: Z790 Aorus Elite AX Rev 1.0, BIOS version F15 RAM kit: G.Skill 6800MT/s 34-45-45-108 (G.SKILL F5-6800J3445G16G) Voltages: VCCSA: 1.200V VDD2 (IMC, I guess): 1.250V VDDQ TX:…
As the title says; I lost my old overclock settings due to clearing cmos and forgot to save the settings in a profile so did some settings from memory and some from guides but now the PC wont shutdown properly,…
MSI unveils GeForce RTX 5090 LIGHTNING graphis card, featuring dual-connector design up to 1600W
Overclockers push MSI RTX 5090 Lightning to nearly 3.75 GHz, XOC BIOS screenshot shows 2,500W limit
So I wanted to overclock my Raspberry pi 5 (16gb ram), so I searched up tutorials and started to push higher and higher, from 2.4ghz to 3.2 ghz at the end, only on air cooling so it was pretty Impressive,…
https://imgur.com/a/LGGSrKr Here's a little known trick. Antivirus scans can find system instabilities faster than p95, OCCT, or corecycler. It's a very diverse, bursty, multithreaded workload, that cycles your cores from idle to load repeatedly, very rapidly (scanning tens, hundreds of…
Hey folks, I recently finished my AM4 build, and have been using it for gaming, and light Cad and rendering projects. I wanted to see how much I could squeeze out of my system(Naturally) Im currently working on a render…