He got them wrong indeed, he put long screws in short holes.
SlotV96
That’s what happens when you tighten the wrong screw in the wrong hole…
Helkael
larger screws used in place.
intel_Core_
Couldn’t this also be some sort of standoffs so that the monitor does not touch the keyboard when closed?
ImaginaryMuff1n
This is why it’s important to remember where each, that’s different to the others, screw came from.
agusmnl
Used larger screws.
XeonoX2
Same happened to me when I used too long screws
3bood_Al7assan
You put long screws in the place of the short screws.
Ale_Sam006
I recommend seeing if these protrusions match the location of the screws, if not it’s just a support for the screen not to touch the keyboard that every laptop has, if so see an Image of a laptop of the same model but new, does it have the protrusions? If so, guess what… If not, then I think you now have new supports so the screen doesn’t touch the keyboard when you close the laptop, congratulations on the purchase
Haha, bro, you got baptised by fire) I got the same thing when I upgraded my first laptop. Put a sticker on it and it was unnoticeable unless you touched it. Good luck to you with your future endeavours, don’t let that ruin your enthusiasm!
kaotikb
Aliens
Subsinuous
You screwed the wrong hole. Now you’re screwed.
Most_Ad_4548
Ah that… xD
pantas_aspro
Someone did put longer screws there.
Crystal_artificer
*Notices your bulge*
OwO what’s this? :3
Conscious-Opposite88
Wrong screws
MachineCarl
A lesson to remember where the short and the long screws are designated to go. You’re lucky your dad just bulged into the plastics and didn’t short anything
Cold_Market4614
Your laptop is cold
Retro_Jedi
My penits
Jack_Claude_van_Ban
Unfortunatly wrong size screws that almost punctured the palm rest. It happens sometimes.
CommercialShame5961
You should kick you pc master
shawndw
Looks like long screw damage.
runed_golem
The screws were either massively overtightened or else the screws were put in the wrong holes (long screws in short holes and vice versa).
37 Comments
Wrong screw length or screws done too tightly.
He got them wrong indeed, he put long screws in short holes.
That’s what happens when you tighten the wrong screw in the wrong hole…
larger screws used in place.
Couldn’t this also be some sort of standoffs so that the monitor does not touch the keyboard when closed?
This is why it’s important to remember where each, that’s different to the others, screw came from.
Used larger screws.
Same happened to me when I used too long screws
You put long screws in the place of the short screws.
I recommend seeing if these protrusions match the location of the screws, if not it’s just a support for the screen not to touch the keyboard that every laptop has, if so see an Image of a laptop of the same model but new, does it have the protrusions? If so, guess what… If not, then I think you now have new supports so the screen doesn’t touch the keyboard when you close the laptop, congratulations on the purchase
Long screw. Short hole.
is it [this one](https://youtu.be/kLMOr5E26tI?si=SibBih0Y5qxiJgcu&t=321) ? yup looks like there should be no bumps, completly flat, so the theory of long screws makes sense
Correct answer – too long screws
Fun answer – Brail for blind computer users
That’s why I like Dell. Screws from bottom are fixed to the screw sockets. No way to replace it. Dell B>
Mind your screw length people
Some things are too long for some holes 😆
It’s full of milk
You, without a doubt, put the wrong screws in the wrong holes.
Wow. Just, wow
Simple Jack screwed your laptop
warts
https://preview.redd.it/07ro0cpoo53f1.jpeg?width=938&format=pjpg&auto=webp&s=a1ad49e3d0a4d08a73c23d58a3d61cb919412f76
Haha, bro, you got baptised by fire) I got the same thing when I upgraded my first laptop. Put a sticker on it and it was unnoticeable unless you touched it. Good luck to you with your future endeavours, don’t let that ruin your enthusiasm!
Aliens
You screwed the wrong hole. Now you’re screwed.
Ah that… xD
Someone did put longer screws there.
*Notices your bulge*
OwO what’s this? :3
Wrong screws
A lesson to remember where the short and the long screws are designated to go. You’re lucky your dad just bulged into the plastics and didn’t short anything
Your laptop is cold
My penits
Unfortunatly wrong size screws that almost punctured the palm rest. It happens sometimes.
You should kick you pc master
Looks like long screw damage.
The screws were either massively overtightened or else the screws were put in the wrong holes (long screws in short holes and vice versa).

Bulges! American Women love them!
Screws in the wrong holes.