Definitely not!
Unmount and remount after watching a youtube videođź‘Ť
DJ_Cas
Top side is not mounted correctly
Cassius_Smoke
I’ve had to flip my heatsink ‘upside-down’ to get it to mount properly. Try flipping it.
Independent-Jump8493
Rule of thumb for ya: if you have to ask, then it’s safe to say it’s not supposed to look like that.
Izan_TM
no, NOOO IT’S NOT
shyalienneighbour
As replied by others no. i recently installed thermalright PA . Difficult to tell from the picture but probably the pressure from the 2 screws for mounting are not balanced. Dont immediately finish up on one side and proceed to the other. Take turns to screw on both side bit by bit simultaneously until both screws are in place / balanced.
NeverEndingWalker64
No. For God’s sake, that isn’t supposed to look like that.
Put that PC with its window facing up, put that cooler off, and look what in the hell is having that cooler in that direction.
The rest of the PC looks pretty dope though.
wetmeatballs
Yup looks good!
Creamsickled
I had to reposition my cooler because the MB had a bunch of crap tilting it. Also I had to move the ram over because the cooler was huge
No_Interaction_4925
You done goofed
CNR_07
No. That can’t be good for the mainboard.
SickPois0on
no
Mortar_man_0341
Negative
Skinc
Looks like the cooler is too big to clear your memory. You need low profile modules.
Status-Leadership-20
I have this same CPU fan. It’s not mounted entirely on the top. Lay your case down and remove the fans. Tighten it in an X pattern. It should be snug but not too tight. (Don’t want to strip your screws or damage the board.) Also, move that front fan a little forward. It shouldn’t be touching your ram.
Drrakkainen
lol no, you’ll need to remove one of the fans from that cooler to fit it with this ram, should be fine without it or at least give it a try before getting one that fits
Sadik
Negatory.
Beneon83
No. It’s both not seated correctly and not clearing you ram. You’ll have to clip the fan on the other side to clear ram and then take off and remount properly.
KalleSchwanzen
What the hell? Tower of Pisa?
Kanoobert
That dog ain’t gon’ hunt
SendyCatKiller
Looks like it’s not even making contact with CPU
BenderDeLorean
Cool cool
(not for the CPU)
_its_wapiti
Bro has CPU sag
Electronic_Buyer_570
Bruh
Bagafeet
Is there enough clearance above the ram sticks?
Laukx
No, it doesn’t fit because of your ram
Rady151
OMG NO
meithan
Where’s the NSFMR flair? My heart skipped a beat.
AllisonJolicoeur
Those CPU cooling are dogshit
Chudz
If you have to ask that maybe buy a PS5 or something
likeonions
yes, the slant makes it faster
cheezepie
Not at all. CPU cooler sag is not a normal thing. But it looks like your MOBO is too small for that cooler. The fan should not be above your ram.
xX_Bacon_Boi_Xx
CPU cooler sag
I_DONT_KNOW_CODE
Don’t know anything about computers but I can confidently say that with my four book course you will know and it’s just 500$ per page.
Quirky_m8
#no
Seven_Hawks
Your temps must be awesome
FivEF00TGianT
You know damn well it’s not supposed to be like that…….
40 Comments
No
Definitely not!
Unmount and remount after watching a youtube videođź‘Ť
Top side is not mounted correctly
I’ve had to flip my heatsink ‘upside-down’ to get it to mount properly. Try flipping it.
Rule of thumb for ya: if you have to ask, then it’s safe to say it’s not supposed to look like that.
no, NOOO IT’S NOT
As replied by others no. i recently installed thermalright PA . Difficult to tell from the picture but probably the pressure from the 2 screws for mounting are not balanced. Dont immediately finish up on one side and proceed to the other. Take turns to screw on both side bit by bit simultaneously until both screws are in place / balanced.
No. For God’s sake, that isn’t supposed to look like that.
Put that PC with its window facing up, put that cooler off, and look what in the hell is having that cooler in that direction.
The rest of the PC looks pretty dope though.
Yup looks good!
I had to reposition my cooler because the MB had a bunch of crap tilting it. Also I had to move the ram over because the cooler was huge
You done goofed
No. That can’t be good for the mainboard.
no
Negative
Looks like the cooler is too big to clear your memory. You need low profile modules.
I have this same CPU fan. It’s not mounted entirely on the top. Lay your case down and remove the fans. Tighten it in an X pattern. It should be snug but not too tight. (Don’t want to strip your screws or damage the board.) Also, move that front fan a little forward. It shouldn’t be touching your ram.
lol no, you’ll need to remove one of the fans from that cooler to fit it with this ram, should be fine without it or at least give it a try before getting one that fits
Negatory.
No. It’s both not seated correctly and not clearing you ram. You’ll have to clip the fan on the other side to clear ram and then take off and remount properly.
What the hell? Tower of Pisa?
That dog ain’t gon’ hunt
Looks like it’s not even making contact with CPU
Cool cool
(not for the CPU)
Bro has CPU sag
Bruh
Is there enough clearance above the ram sticks?
No, it doesn’t fit because of your ram
OMG NO
Where’s the NSFMR flair? My heart skipped a beat.
Those CPU cooling are dogshit
If you have to ask that maybe buy a PS5 or something
yes, the slant makes it faster
Not at all. CPU cooler sag is not a normal thing. But it looks like your MOBO is too small for that cooler. The fan should not be above your ram.
CPU cooler sag
Don’t know anything about computers but I can confidently say that with my four book course you will know and it’s just 500$ per page.
#no
Your temps must be awesome
You know damn well it’s not supposed to be like that…….
Fuck no, not today Satan
The leaning cooler of PCMR.