Are my timings optimal? I mostly push them to the tightest they can go without errors, also Is tRFC supposed to go this low? I just run a 30 minute fur gpu test sometimes an hour while I run a extreme1 mem test and get no errors even on 290 but I don’t know how low you should be going for it, and is there any settings I can change from auto or anything or anything I could probably tighten, I think I’ve tested most things though, my temps are good I think, I stay under 60c even during a fur test + extreme1 test for 1h
(aorus elite ax z790 rev1.1 is my motherboard)
2 Comments
Oh, I forgot to mention, should I be oc my ram speeds then tighten timings if i want max performance for gaming? Ik my ram is capable of going to at least 6200 stable but idk what ram timings it would run, also I’m unsure if a i7-13700kf (5.5ghz e-cores disabled 49 ring) could have a 1:1 with 6200
I have an MSI z790, Team Group Delta 6000 cl38. I used a video guide to get it to 6200 cl 30. More importantly the latency is down by over 10ns. I copied the settings straight up, but I have SK Hynix. So you’ll want to make sure you know if you also do before attempting. I also didn’t set my voltage to 1.5v as I’m not comfortable with it that high. But 1.4v.
[https://www.youtube.com/watch?v=y0gihuMQ9S0](https://www.youtube.com/watch?v=y0gihuMQ9S0)
Good luck. The video is a bit annoying because they used AI to translate and it sounds funny. But it helped me get some pretty fantastic performance out of my RAM. 57.4ns.