This oc has ran 10 hours of anta777 extreme so I'm pretty sure it's stable, plus a few other tests. But I wanted to know if there's anything I should change or improve about my timings or voltages. I believe my ram is hynix m die if that helps, also is 1.5 volts daily safe for it? I'm using a fan on them so they only get to 38c Max temp. also I feel like my aida latency really isn't that good compared to similar ram timings I've seen others get, is there anything wrong with mine or is it normal?
2 Comments
Voltage is high for 6400 CL30. Try 1.4
I run 6400 CL30 16×2 with 1.4
tRDWR 15
tWRRD 1
Bios tweaks:
iGPU: Disable
BankSwapMode: Swap APU (only do this if you disable iGPU)
SVM: Disable
Nitro on: 1-2-0 or if doesnt boot 1-2-1, robust memory training on, X8 X8
TSME: Off
Data Scramble: Off
You can match tPHYRDL if you havent yet, you do it in BIOS with ArRdPtrInitValue.
Personally I also follow some timing rules from [overclock.net](http://overclock.net), you can see if they are better for you if you want:
tRAS=58 (tRCD+tRTP+8)
tRC=96 (tRAS+tRP)
tRRDS=8
tRRDL=12
tFAW=32
tWTRS=4
tWTRL=24