Failed after 8 hours in Aida combined with all the below.
Thanks to a person, I got 2200fclk stable somehow, doesn't bsod or freeze like before and I let Aida running for a good 10 hours overnight.
I'm currently going back to 1 2 0 nitro and found that it was stable with a higher vddp and a 40dramdqds with a quick 3hr prelim test (again, doesn't freeze or bsod in like the first few minutes)
I'm also trying cl26 again since that led to very high latency spikes before but was still stable for some reason. This time it reduced latency by 1ns or so.
Currently what i'm going to do is dial back to cl28 which I know for a fact is alright and then have the stress test run again and see if that's the problem, any ideas from you guys or anything that looks off?
1 Comment
Get as close to 1.2v soc as you can. Try 6000 at 1.2v and soc at 2200fclk. Run linpack extreme with the 8 or 10GB option whatever is not experimental and do 30 iterations of it. Compare the first 5 times with the last 5 times and make sure they’re really close. Like less than 1% difference. If they aren’t, then 2200 isn’t stable. Aida64 is not a good test for fclk.