I just received my used 1080 i got of the used market, and the dude sent me it in a damn shoebox. I can't even get it into my pc. I WAITED 15 DAYS FOR THIS TO ARRIVE AND I CAN'T EVEN USE IT
Just bend the tab back. It would have taken less time than taking a picture and making this post 🤦
fafarex
juste remove the metal plate if you can’t bend it back.
Dense_Row2811
Get some jaw locking pliers and bend the tab back
smelly1sam
Unscrew the plate and hammer it on a flat surface. I’ve had to do it a few times.
ThexWreckingxCrew
I have fixed these plates plenty of times through my business for 1080’s and they are not hard to use pliers to bend it back. Using your picture you hold the video card on your left hand which you are doing now and use pliers on your right hand and bend it back. This is what I do on how to bend it back. Its not hard to do.
You can also order the plate for it for dirt cheap on eBay. They run around 10-13 bucks.
Since you bought it from the used market I do recommend you return it because who knows if it works. Plus you have a very tiny return window if you bought it from Mercari, offerup, and facebook marketplace. (48-72 hours).
Cefalopodul

Adept_Temporary8262
you could probobly bend it back. shity seller though for not properly packaging it.
ClamsAreStupid
OP is afraid to bend an effectively useless metal plate back to an ideal state…
Bend that shit back and send it. It’s a 1080 for crying out loud
FrostFruitOfficial
I had a 1080 Ti come in a similar condition. But instead of making a reddit post about it I realised that the damaged part is a piece of metal… and I realised I owned these amazing things called pliers, not sure if you’ve heard of them. So maybe just… idk… bend it into place? Or ask your dad since “These things were built different trust me when i say”
C-c-c-comboBreaker17
Are you a moron? It takes ten seconds to fix that with a pair of pliers.
pepperoni__________
Get your tools and fucking bend it back. Stop being useless.
Flames21891
I’ve dealt with bent tabs like this before. With a sturdy pair of pliers, you can bend them back. It might take a little trial and error to get the tabs properly straight to where they slide in like they’re supposed to, but it’s doable.
That said, the seller definitely should have packaged this better, and it really shouldn’t be up to you to fix their fuck up, so I can totally understand if you go for a refund.
But if you’d rather just have the card with some minor damage to the bracket, find some pliers.
NuclearWaffelle
Had this happen to me last year – I ended up returning it because there was damage to the PCB as well. If it’s just the plate, grab some pliers, wrap the tips in electrical tape, then get to bending. I recommend taking the plate off first – worst case scenario you can probably find a replacement on eBay.
Square-Instance9677
This wasn’t worth posting. By the time you did that, you could have already bent the tab back with a pair of pliers 😅
AverageDad_86
Unscrew it and bend it back
runed_golem
That plate is just made of sheet metal. Grab a pair of pliers and bend it back into place.
TactualTransAm
My Titan came like that, I took the plate off and bent it back
thefishbiscuits
Hit it with your purse.
Morall_tach
>You can’t guess my next move.
Was it “quit whining about the least important part of the card and fix it yourself”?
ye3tr
Remove it and hammer it. You have to embrace the jank if you’re budget balling
39 Comments
I think we all agree you owe the guy a couple bucks for the free shoebox. What kind of shoebox? Don’t hold back on details, you silly teaser.
1080 ?
https://preview.redd.it/yl3zosrk31ff1.jpeg?width=458&format=pjpg&auto=webp&s=f7086f0a9eb6b905f5d285e8d0acfe20e6cfcaae
Just bend the tab back. It would have taken less time than taking a picture and making this post 🤦
juste remove the metal plate if you can’t bend it back.
Get some jaw locking pliers and bend the tab back
Unscrew the plate and hammer it on a flat surface. I’ve had to do it a few times.
I have fixed these plates plenty of times through my business for 1080’s and they are not hard to use pliers to bend it back. Using your picture you hold the video card on your left hand which you are doing now and use pliers on your right hand and bend it back. This is what I do on how to bend it back. Its not hard to do.
You can also order the plate for it for dirt cheap on eBay. They run around 10-13 bucks.
Since you bought it from the used market I do recommend you return it because who knows if it works. Plus you have a very tiny return window if you bought it from Mercari, offerup, and facebook marketplace. (48-72 hours).

you could probobly bend it back. shity seller though for not properly packaging it.
OP is afraid to bend an effectively useless metal plate back to an ideal state…
https://i.redd.it/jsily2ug91ff1.gif
Bend that shit back and send it. It’s a 1080 for crying out loud
I had a 1080 Ti come in a similar condition. But instead of making a reddit post about it I realised that the damaged part is a piece of metal… and I realised I owned these amazing things called pliers, not sure if you’ve heard of them. So maybe just… idk… bend it into place? Or ask your dad since “These things were built different trust me when i say”
Are you a moron? It takes ten seconds to fix that with a pair of pliers.
Get your tools and fucking bend it back. Stop being useless.
I’ve dealt with bent tabs like this before. With a sturdy pair of pliers, you can bend them back. It might take a little trial and error to get the tabs properly straight to where they slide in like they’re supposed to, but it’s doable.
That said, the seller definitely should have packaged this better, and it really shouldn’t be up to you to fix their fuck up, so I can totally understand if you go for a refund.
But if you’d rather just have the card with some minor damage to the bracket, find some pliers.
Had this happen to me last year – I ended up returning it because there was damage to the PCB as well. If it’s just the plate, grab some pliers, wrap the tips in electrical tape, then get to bending. I recommend taking the plate off first – worst case scenario you can probably find a replacement on eBay.
This wasn’t worth posting. By the time you did that, you could have already bent the tab back with a pair of pliers 😅
Unscrew it and bend it back
That plate is just made of sheet metal. Grab a pair of pliers and bend it back into place.
My Titan came like that, I took the plate off and bent it back
Hit it with your purse.
>You can’t guess my next move.
Was it “quit whining about the least important part of the card and fix it yourself”?
Remove it and hammer it. You have to embrace the jank if you’re budget balling
https://preview.redd.it/ua8ecvxjq1ff1.png?width=1295&format=png&auto=webp&s=fd37c18e59bb70bd36d94de83a9a43fe983bcba7
In case you don’t want to bend, you can just get them from the e site. Less than 10 bucks (consider shipping tho)
So dramatic. Undo the screws. Pull the plate off. Bend it back. Screw it back on.
Not an expert, but it seems like you could just Bend the tab back into place.
Just bend it back and be glad this is all that was wrong. Those pieces are even replaceable.
That tab isn’t important to its functionality just bend it back and if it breaks off who cares it’ll still work anyway. Also a 1080 in 2025?
Bro is crying is over bent metal. Lol
Ahh shit nan. That cannot be fixed at all. Dont even try. Dm me and ill take it off your hands and dispose of it immediately.
Thats like, the easiest part of the entire card to repair….
It can be saved bend it back, if it still doesn’t work get that money back.
Bend it back?
if it’s through ebay get a partial refund and straighten it out yourself
just bend it back? 2min job?
This generations is soft af
https://preview.redd.it/mgesoc30m2ff1.jpeg?width=1284&format=pjpg&auto=webp&s=422701c0ca925999658a1259247200a658428b31
Bend back the tabs?