I`m running a stress test on my RTX 3070 OC rev 1 and so far it’s not crashing. Default was at 1.006V but brought it down to 0.893V, I also tried over clocking a little bit.
I`m running a stress test on my RTX 3070 OC rev 1 and so far it’s not crashing. Default was at 1.006V but brought it down to 0.893V, I also tried over clocking a little bit.
1 Comment
Yeah, it’s good. I have the same card. But what’s much better is the curve editor. Take the time to get familiar with it and you’ll probably blow these settings out of the water. With less voltage at that.
I have a safe curve set to top out at 2000mhz at 1.0v. And have my memory bumped up by 1000. You should be able to achieve these or even better results.
Also max out the temp limit. And there should be a voltage unlock in the settings somewhere you can set a higher Power Limit. Do that too.