Hi!
I have been tightening the timings on my 6000CL26 M-die G.skill kit, and with the current config it consistently errors out around the 6 hour mark in TM5 (6th time with minor voltage and timing changes).
Any tips on voltages and timings to get this stable?
VDDIO is 1.4V and VSOC 1.25. I have tried higher and lower VSOC with and without CO and it's the same story with errors around 6 hours. Trying 1.55VDD it failed after only 2 hours.
All help appreciated!
3 Comments
From what I’ve seen, going from 37 to 36 tRCDRD is pretty tough.
Other stuff to try:
tRRDS/tRRDL/tFAW to 8/12/32 (I haven’t personally seen any improvements from going tighter than that)
tWTRL to 24
Your CPU VDDIO seems way too low, should be around 1.4V/1.45V, VSOC at 1.2/1.235V/1.25V
What if tRFC = 624? Still errors?