G.Skill F5-6000J2636G32G, 2x32GB @ 6400mhz
Any advice on the timings and voltages I have on hand? I've dabbled in RAM timings for some time now, but I know others know this topic WAY better than I do.
If I need to loosen them or tighten them, I can do that. Just wanted to know if this was a healthy timing set.
Any advice is welcome! Thanks!
5 Comments
what results would you like ? be realistic tho lol
Disabled gdm. Run 1usmus overnight. Lower voltage. Tfaw. And some others. Run 1usmus again
8-12-32-4-24 for trrds-trrdl-tfaw-twtrs-twtrl tend to perform better both higher bandwidth and lower latency
Can also dabble with +4 or +8 extra on trc instead of +0 which you run now. Would have to do some benchmarks to confirm before/after.
Can lower cldo vddp to 950-970mV. Doesn’t need more than that at 3200 mclk.
Lower SCL’s to 5/5 and test if stable. Bumps bandwidth.
Disable gdm as mentioned by another user. Your timings should work fine with gdm off. Same with my suggestions. Might need one step more vdimm if vdimm is on the edge of stability at 1.65V with changes to SCL’s and gdm off.
Tfaw 24, but you’re already kinda at the point of diminishing returns
Trdrdsd/dd 6
Twrwrsd/dd 8