Help! Newbie overclocker here attempting to use Buildzoid's timings to overclock G.Skills DDR5-6000 CL26 to 8000 CL30. I am using the same memory (F5-6000J2636G16GX2-TZ5NR), motherboard (MSI MAG X870E TOMAHAWK) and CPU (9800X3D) as in Buildzoid's video, however I am getting errors within 10-30 seconds of memory testing with OCCT and Karhu. The pc also crashed a few times when running the OCCT mem test. Otherwise, the system appears to be stable for the short time I've used it – I am able to browse, run Cinebench and even Black Myth Wukong Benchmark without issues. 🙂
Note that I am using the latest bios version (E7E59AMSI.2A52), whereas Buildzoid used a version from back in December (E7E51AMSI.1A20). I restored the BIOS to default and then applied Buildzoid's settings, so I am not overclocking the CPU or anything. I've attached screenshots from Zentimings, if that helps. Thank you!
Buildzoid's video – https://www.youtube.com/watch?v=Car8JXykSEs
1 Comment
loosen timings to get it stable and go from there for 8000 c38 or 40. for c30 I’d expect to need a lot of voltage
you also need to have a fan blowing directly on the ram