So I bought an M-die G.skill 6400 CL34 48GB kit. to 8000mhz CL38 48 GB RAM. On my particular CPU I found it much easier to get 8000mhz cl38 stable than a really tight 6200mhz at 1:1 ratio. My CPU can not do 6400mhz at 1:1 sadly. So I called it a day Tuned my Ram kit to 8000mhz cl38. I'm quite happy with the Results.
Onions?
3 Comments
I also wanted to add that Nitro settings are 1/3/1. Im torn on if I should push the ram kit any further or if I should just leave it as is because it is an M die kit. I dont want to have to have special cooling just for the ram. On top of that I do have a 4090 in the case.
Wanted to get some opinions from you all
I’m keen to try 8000 on my 9950x3d because sadly it won’t do 6400 1:1 either and I have the new gskill 6000cl26 kit but it’s 2x64gb dual rank A-die
Not sure if 8000 is possible on dual rank kits ?
Try going for 2200fclk. 1.15v soc is good, but 1.1v would be better. Raise both vddg to 1.05v and try 2200. Trfc could go lower but with 65535 trefi it doesn’t matter. Make sure phyrdl are matched, otherwise there’s only a little left to do