Creeping up on higher memory clocks on the 9600X, starting with 7600 (fclk=uclk=1900MHz) and ran a couple hours of stability tests with passing results. Didn’t run them as long as I usually would as I was anxious to move along to higher speeds, which is why I’m currently almost 2hrs into a final Karhu check on 7800 (fclk=uclk=1950) that has passed 30 minutes of Y-cruncher and OCCT already.
XMP for the memory kit is 8200 so I’m most curious to see how things go when I get to 2000 and 2050MHz on the infinity fabric. Hoping I don’t need to push voltage any higher since I’m already at 1.44-1.45V, but without applying crazy tight timings I might not have to- just trying to make it easier to push the overall speeds higher first.
1 Comment
Why are u considered about vdd? 1.45 seems pretty low for Hynix a die