Or if you do need the drive cage, chop off the bit that gets in the way.
SirGeorgington
Dremmel time
cszolee79
SRDD_Mk-II
Just yank the cage or dremel the space needed out.
n674u
Buy a new case.
Prometheoarchaeum
LowQualitySpiderman
what century is this case from?
Stoff3r
It’s time to upgrade that clunker from 2008.
Bacon-muffin
Boi if we’re sporting 3080’s and 3090’s I feel like we can do better on the case front
Queasy_Employment141
Hammer it out?
XxMohamed92xX
Im gonna have the same issue upgrading from my 1080, got to find a 2 fan gpu that isnt too long
ShrkBiT
Time to bring out the dremel. I assume you bought that case for a reason, riding the train for 4 hours, so I would suggest cutting the back halves off the GPU’s to spare the case. Between the 3080 and 3090 halved, you should still have about RTX3085 performance which isn’t half bad. Or in this case is half, at that point, idk
showoff0958
Me too dude…me too
Interesting_End_7813
That case looks like it came from the 90s… time for a new case. You can get big ones cheap enough.
A full ATX can never be wrong.
Lougarockets
OP when buying 2000 dollars worth of gpu: ye boi let’s go
OP when buying a 40 dollar case to upgrade 20th century relic: *absolutely fucking not*
BetterValuable8596
I wish I had this issue 🥲
DigitalJedi850
ihateRprojectzomboid
Grab Pliers and a dream, you got this champ
konterpein
i used to have the same thing, I smashed the drive slot then put my 6700xt but then the case side won’t fit with the gpu cable connected, so i just save $18 to buy new mid case
That case looks older than a lot of the people here.
singe725
Damn that sucks. I’ll take them off your hands since clearly there’s nothing you can do
FirefighterLonely452
Dremel modders best friend
Thruthful
“Now where is that Dremel I bought two years ago?”
ConstantineMonroe
If you are gonna splurge on the GPUs, you might as well get a better case
FarmingFrenzy
You can probablt grind that 1/2 cm with an angle grinder off the gpu and it should still work fine. The impoetant stiff is at the center
Kanatsiz_Kus
if i were you. i would definietly get pissed off by this. it looks annoying to me
Nknights23
Just buy a new case? Shouldn’t really be an issue for you seeing as you’re holding 4grand in gpus
msanangelo
ehh, who needs a drive cage, anyhow. just ziptie those ssds. 😛
Wildestridez
I was able to fit a 4080 super into the NR200 case lemme tell u I was sweating bullets getting it in
Open-Comedian9342
That case has zero airflow from the looks of it. Buy yourself a $100 modern case with good airflow, hidden psu, and wire management and thank yourself everyday after that
32 Comments
I would remove the drive cage.
Or if you do need the drive cage, chop off the bit that gets in the way.
Dremmel time
Just yank the cage or dremel the space needed out.
Buy a new case.
what century is this case from?
It’s time to upgrade that clunker from 2008.
Boi if we’re sporting 3080’s and 3090’s I feel like we can do better on the case front
Hammer it out?
Im gonna have the same issue upgrading from my 1080, got to find a 2 fan gpu that isnt too long
Time to bring out the dremel. I assume you bought that case for a reason, riding the train for 4 hours, so I would suggest cutting the back halves off the GPU’s to spare the case. Between the 3080 and 3090 halved, you should still have about RTX3085 performance which isn’t half bad. Or in this case is half, at that point, idk
Me too dude…me too
That case looks like it came from the 90s… time for a new case. You can get big ones cheap enough.
A full ATX can never be wrong.
OP when buying 2000 dollars worth of gpu: ye boi let’s go
OP when buying a 40 dollar case to upgrade 20th century relic: *absolutely fucking not*
I wish I had this issue 🥲
Grab Pliers and a dream, you got this champ
i used to have the same thing, I smashed the drive slot then put my 6700xt but then the case side won’t fit with the gpu cable connected, so i just save $18 to buy new mid case
https://preview.redd.it/70dyu8qtt5dd1.png?width=1158&format=png&auto=webp&s=13734de18b19932a526ac5cd604132089a0ab245
That case looks older than a lot of the people here.
Damn that sucks. I’ll take them off your hands since clearly there’s nothing you can do
Dremel modders best friend
“Now where is that Dremel I bought two years ago?”
If you are gonna splurge on the GPUs, you might as well get a better case
You can probablt grind that 1/2 cm with an angle grinder off the gpu and it should still work fine. The impoetant stiff is at the center
if i were you. i would definietly get pissed off by this. it looks annoying to me
Just buy a new case? Shouldn’t really be an issue for you seeing as you’re holding 4grand in gpus
ehh, who needs a drive cage, anyhow. just ziptie those ssds. 😛
I was able to fit a 4080 super into the NR200 case lemme tell u I was sweating bullets getting it in
That case has zero airflow from the looks of it. Buy yourself a $100 modern case with good airflow, hidden psu, and wire management and thank yourself everyday after that
https://preview.redd.it/7q7p32bzl6dd1.jpeg?width=1169&format=pjpg&auto=webp&s=60a457fc766194df2478f6619f37c9e7e59b4871