I had this problem when I got the 4070ti rog strix. I had to mount the gpu vertical so that I could put the side glass panel on.
Dre9872
I’ve been using an Antec 1200 for about 15yrs, never had a problem lol
BeerGogglesFTW
Back in the day I had to measure my case and order a GPU that would fit, but that was because of those front bays in the case took away 30% of the space.
Now, those bays have been gone for years, but GPU designs decided to push pass that anyway.
brainsapper
Part of me wants to downsize to a smaller case, but then I see posts like this that give me pause.
EatingCookiesInBed
Or your case is too damn small!
Trym_WS
No, you just have a tiny tiny children’s case. 🥳
MeatAromatic4298
Oh hey I have this case, Lian Li Lancool 216, great $100 case and probably could fit the card if you didn’t have the radiator up front.
MakimaGOAT
thats why i upgraded to the h9 flow
tespark2020
which case is that
randomnameenjoyer
more watts more heat dissipation needed
VIBAveijari
H110 is where it is at. I love my little box. I just don’t have AIO block for CPU but one of the best Noctuas and temps are SOOO low.
Then again I could not care less about what my case looks internaly. Performance and sound levels is where it is at.
AlivePalpitation7968
You def have a baby mid tower, my 5000d is amazing🥱
its_probably
“We have an e-GPU at home”
*The e-GPU at home:*
gnocchicotti
Tape measures are too damn expensive apparently
stormdraggy
Imagine spending 100 bucks for a riser cable to look this jank instead of a new case; 150 bucks for a really good case.
stereotypicaltree
Would never buy a GPU without checking case dimensions
Lewdeology
True but you should’ve done your homework.
JackTec
Or get a dual fan gpu?
reallyryan-1899
I think you already knew this when you ordered it… If not then you should have done your homework.
-brokenbones-
No your case is just fucking tiny. Stop it with this small form factor bs. Get a real case that you can actually fit shit into. Idgaf what size gpus are my case will fit any and all.
miedzianek
New meaning of ‘outside of box’ thinking 😁
Its fractal design meshify c?
Had the same, already selling it, choosen cfd meshify 2 compact, new rtx 4070ti super fit perfectly, also case have nice qol’s 😁
bamseogbalade
Hard life lesson learned today
MarriedShoeSalesman
I thought as technology advances, it’s supposed to get smaller?
Think-Sun-1605
Measure twice, buy once;)
MustardRaceMcgee
It’s a struggle to fit most 3090s in a meshify C, let alone a 4090.
Dekeek
If that’s the h510 flow then the radiator and fans are installed incorrectly, you can put the fans on the other side of the metal plate that the radiator is on, screw the fans into the radiator to sandwich the plate, that would free up a decent bit of space for you.
SoDrunkRightNow2
You have two choices:
-drop $150 on a new case
-break out the dremmel and tin snips
tychii93
My AMD 390X is probably the longest card I’ve used. 11.8 inches (300mm), that’s from 2015 iirc lol
Ivantsi
Or you are too blind to read the length.
No-Prune7162
I have same problem with this tower with 7900xtx
I removed cpu water flow and I bought a new good airflow cpu cooler. I don’t have any thermal issues.
Mythicguy
Word.
I bought a 7900 XT and I put it in a H5 Flow from NZXT and it BARELY fit.
31 Comments
I had this problem when I got the 4070ti rog strix. I had to mount the gpu vertical so that I could put the side glass panel on.
I’ve been using an Antec 1200 for about 15yrs, never had a problem lol
Back in the day I had to measure my case and order a GPU that would fit, but that was because of those front bays in the case took away 30% of the space.
Now, those bays have been gone for years, but GPU designs decided to push pass that anyway.
Part of me wants to downsize to a smaller case, but then I see posts like this that give me pause.
Or your case is too damn small!
No, you just have a tiny tiny children’s case. 🥳
Oh hey I have this case, Lian Li Lancool 216, great $100 case and probably could fit the card if you didn’t have the radiator up front.
thats why i upgraded to the h9 flow
which case is that
more watts more heat dissipation needed
H110 is where it is at. I love my little box. I just don’t have AIO block for CPU but one of the best Noctuas and temps are SOOO low.
Then again I could not care less about what my case looks internaly. Performance and sound levels is where it is at.
You def have a baby mid tower, my 5000d is amazing🥱
“We have an e-GPU at home”
*The e-GPU at home:*
Tape measures are too damn expensive apparently
Imagine spending 100 bucks for a riser cable to look this jank instead of a new case; 150 bucks for a really good case.
Would never buy a GPU without checking case dimensions
True but you should’ve done your homework.
Or get a dual fan gpu?
I think you already knew this when you ordered it… If not then you should have done your homework.
No your case is just fucking tiny. Stop it with this small form factor bs. Get a real case that you can actually fit shit into. Idgaf what size gpus are my case will fit any and all.
New meaning of ‘outside of box’ thinking 😁
Its fractal design meshify c?
Had the same, already selling it, choosen cfd meshify 2 compact, new rtx 4070ti super fit perfectly, also case have nice qol’s 😁
Hard life lesson learned today
I thought as technology advances, it’s supposed to get smaller?
Measure twice, buy once;)
It’s a struggle to fit most 3090s in a meshify C, let alone a 4090.
If that’s the h510 flow then the radiator and fans are installed incorrectly, you can put the fans on the other side of the metal plate that the radiator is on, screw the fans into the radiator to sandwich the plate, that would free up a decent bit of space for you.
You have two choices:
-drop $150 on a new case
-break out the dremmel and tin snips
My AMD 390X is probably the longest card I’ve used. 11.8 inches (300mm), that’s from 2015 iirc lol
Or you are too blind to read the length.
I have same problem with this tower with 7900xtx
I removed cpu water flow and I bought a new good airflow cpu cooler. I don’t have any thermal issues.
Word.
I bought a 7900 XT and I put it in a H5 Flow from NZXT and it BARELY fit.
No front mounted radiator for me. Lol