5600 stock
Asrock b550m itx/ac
Corsair 2x8gb 3600mhz ver 3.34 micron E die
Following Eden’s ddr4 guide
I’m new to ocing, trying to find max frequency currently it’s at 2000mhz Fclk 4000mhz? I did an hour of p95 VRAM 100% and p95 large Fft at the same time, 0 Whea errors but after I hit stop on p95 it blue screened. When I run tm5 anta777 I get tons of errors, like 100 in ten minutes but still zero whea. 3933 1967fclk has no errors in tm5 at least for 10 minutes
Wtf is going on and should I just get to tuning at 4000mhz? Also any other tests I should try
5 Comments
If bsod, drop to 1967
The only way 4000 is remotely running is cause all the timings are horribly loose, your better off just going to 3600/3800 and then cranking everything down.
Start with lowering your tRFC and see what it will give you at the slower speeds, then start working on primaries, you’ll probably be able to get close to say 16 20 20 40 or around that at the slower speeds, cause right now its pointless running 4000 at those timings
Run 3933 and 1967 then and work on timings
Turn down vddg iod, 1.1 is in the high side. 2000 fclk is not impossible but also not that common, I have a chip that can do it but if you’re getting any core or WHEA errors it’s not gonna work, you’re just gonna get random 1 second freezes while playing and odd stutters at random time and maybe an occasional blue screen.
take a look
[https://docs.google.com/spreadsheets/d/1dsu9K1Nt_7apHBdiy0MWVPcYjf6nOlr9CtkkfN78tSo/edit#gid=321590489](https://docs.google.com/spreadsheets/d/1dsu9K1Nt_7apHBdiy0MWVPcYjf6nOlr9CtkkfN78tSo/edit#gid=321590489)