Forgot to post what it cooled. OC i7 7700k 4.8Ghz 0AVX offset
1.35V core
gazooontite
Looks like you didn’t put enough🤷🏻♂️
Obvious_Drive_1506
Yeah you’re supposed to spread it. However if it was only 80c must’ve been flat
Texasaudiovideoguy
I didn’t think you were supposed be to is Liquid Metal on an IHS. From everything I have read it’s for delided or bare CPUs.
Edit: the picture shows a cpu that is not delided.
THEFUNKI
Corsair AIO ? I had, and still have, the same setup. Delided + repasted with liquid metal, corsair AIO, 7700k. I did use mx-4 between the IHS and AIO thought.
Ran at 5ghz for like 5 years at this point, what a beast !
Texasaudiovideoguy
This is a 7700k with the ihs removed. The Liquid Metal goes on the bare chip on the left.
7 Comments
Forgot to post what it cooled. OC i7 7700k 4.8Ghz 0AVX offset
1.35V core
Looks like you didn’t put enough🤷🏻♂️
Yeah you’re supposed to spread it. However if it was only 80c must’ve been flat
I didn’t think you were supposed be to is Liquid Metal on an IHS. From everything I have read it’s for delided or bare CPUs.
Edit: the picture shows a cpu that is not delided.
Corsair AIO ? I had, and still have, the same setup. Delided + repasted with liquid metal, corsair AIO, 7700k. I did use mx-4 between the IHS and AIO thought.
Ran at 5ghz for like 5 years at this point, what a beast !
This is a 7700k with the ihs removed. The Liquid Metal goes on the bare chip on the left.
https://www.eteknix.com/intel-core-i7-7700k-kaby-lake-delidding-analysis/
Was you cold plate nickel coated? On my pure copper cold plates I need to reapply LM about 3 times over 18 months…then it could go years.