Try it, Maybe you cut some traces if that’s the case then rip motherboard….
DangyDanger
I think this is supposed to be a circular hole.
I have some faith it’d still work though. Seems like all you damaged is the mask.
L0veToReddit
I don’t see scratch
Gullible-Computer-43
Man, that sucks. Depends on how deep the scratch is.
[deleted]
[removed]
[deleted]
[removed]
Anotherthrowawayboye
Nail polish
Audiostuffbyme
How did you do that?
Chronos669
You’re fine
[deleted]
[removed]
Jerzup
I don’t see a scratch, I see a damn hole.
Lostmavicaccount
Where is the scratch? Can you please circle it and repost the image?
KasjaneXX
You’re not screwed… Neither is the motherboard
Mr_Bivolt
It seems that you have a broken line or two.
If the board does not start, take a soldering iron, a bit of flux and try to solder together the tracks top right from the hole. Just spreading tin around should do the trick. Be wary of not connecting adjacent lines.
BaconMeetsCheese
“Scratch”
DctrBojangles
aight_ima_gosus
“scratched” home boy capping 💀
Bright-Efficiency-65
How the fuck did you manage that
thomolithic
Wtf were you even doing to elongate the hole?!
Comprehensive_Ship42
How are we to know plug it in and find out
IMI4tth3w
Yikes. Thats wild how close those memory traces are to that mounting hole.
minefarmbuy
Scratched?
wewoopepoo
dawg what happened
Hottage
The fuck did you scratch it with, a blowtorch flame?
astro_plane
Looks like you might have messed up the traces for the ram. You’ll have to check for continuity.
ArthurMorgansFish
that is NOT A SCRATCH that is A REALLY BIG HOLE
MightyBeastt
Dude that a second hole not scratch
ChampionshipWide4877
Yup, throw it away and buy a brand new one off ebay
poopsterc
When you install the mobo with an impact driver
bigred1978
Yup. You done fucked up A.A.Ron.
JI-RDT
There are no lines so probably works
ericsslvdr
I see no scratch there
Forward_Strength152
Send to me I’ll fix it free of charge.
Correct_Juggernaut24
Is it just me, or does it seem like OP used a case screw where a mobo screw should have been? The thread pattern would never create such damage unless 1. OP extremely over tightened(via electric screw driver or impact driver), or 2. They cross threaded the fastener and continued to apply torque.
Other than that, I honestly can’t see how this amount of damage is applied to a motherboard. I’m not trying to make OP feel bad, just giving an overview of the images and context. Merry Xmas and for those that don’t celebrate Xmas, Happy holidays!
Triq1
Was it you that made the hole? The traces are routed around it so I would guess that wasn’t you, despite what others are saying
Ok-Space-735
Bruh that’s a hole
varysbaldy
Is ‘scratched’ the new word for ‘hole’?
darknetwork
Scratched? With what? Did you use light saber?
Gibson45
Does it work?
cburgess7
I can see 2, possibly 3 obliterated traces, that thing is done
_AmaShigure_
D*mn, it looks like a APFSDS rounds lunch though that thing….
45 Comments
Try it, Maybe you cut some traces if that’s the case then rip motherboard….
I think this is supposed to be a circular hole.
I have some faith it’d still work though. Seems like all you damaged is the mask.
I don’t see scratch
Man, that sucks. Depends on how deep the scratch is.
[removed]
[removed]
Nail polish
How did you do that?
You’re fine
[removed]
I don’t see a scratch, I see a damn hole.
Where is the scratch? Can you please circle it and repost the image?
You’re not screwed… Neither is the motherboard
It seems that you have a broken line or two.
If the board does not start, take a soldering iron, a bit of flux and try to solder together the tracks top right from the hole. Just spreading tin around should do the trick. Be wary of not connecting adjacent lines.
“Scratch”
“scratched” home boy capping 💀
How the fuck did you manage that
Wtf were you even doing to elongate the hole?!
How are we to know plug it in and find out
Yikes. Thats wild how close those memory traces are to that mounting hole.
Scratched?
dawg what happened
The fuck did you scratch it with, a blowtorch flame?
Looks like you might have messed up the traces for the ram. You’ll have to check for continuity.
that is NOT A SCRATCH that is A REALLY BIG HOLE
Dude that a second hole not scratch
Yup, throw it away and buy a brand new one off ebay
When you install the mobo with an impact driver
Yup. You done fucked up A.A.Ron.
There are no lines so probably works
I see no scratch there
Send to me I’ll fix it free of charge.
Is it just me, or does it seem like OP used a case screw where a mobo screw should have been? The thread pattern would never create such damage unless 1. OP extremely over tightened(via electric screw driver or impact driver), or 2. They cross threaded the fastener and continued to apply torque.
Other than that, I honestly can’t see how this amount of damage is applied to a motherboard. I’m not trying to make OP feel bad, just giving an overview of the images and context. Merry Xmas and for those that don’t celebrate Xmas, Happy holidays!
Was it you that made the hole? The traces are routed around it so I would guess that wasn’t you, despite what others are saying
Bruh that’s a hole
Is ‘scratched’ the new word for ‘hole’?
Scratched? With what? Did you use light saber?
Does it work?
I can see 2, possibly 3 obliterated traces, that thing is done
D*mn, it looks like a APFSDS rounds lunch though that thing….
Did you use a drill?
Dumbass
“Scratched”
Scratched they say