That’s way too much and it’s gonna spread everywhere.
robbydf
less paste, same way.
Observable_Darkness
a bit too much, but in the end rly doesnt matter if u dont clean change your cpu every 2 weeks
debugman18
While it won’t hurt anything, technically, that is a shit ton of paste.
Plutonium239Mixer
Congrats on the new upgrade! As others have stated, that is too much thermal paste. But, you won’t have to worry about that until you eventually take the cooler back off.
yametekudasstop
Are you scooping ice cream or something?
ApprehensiveAd6476
What he do? Is a CPU, you not icing a cake!
AnywhereHorrorX
It’s hard to believe this video isn’t just an elaborate attempt at trolling.
reallyryan-1899
Is he icing a cake?
i3order
Spread method is the way but that’s a fairly thick coat and is going to ooze everywhere.
Comfortable-Beat-444
wasté of pasté
CharlesEverettDekker
I mean, could’ve been better? Still not that bad. It’s better to overapply than underapply.
_gadgetFreak
Bro is icing the cake.
Greyman43
That’s way too much, it’s a CPU not a birthday cake!
Cell_Enough
Only about 10x too much lol
userbeneficiary
he must be from the verge staff
The_AM_
Well, it’s always better to put on a bit too much than a bit too little…
hauntedyew
It’s an older technique, the icing the technique, but very easy to over do. It might be better for something like a Threadripper or Xeon workstation CPU.
For most desktops, I do a mix between the X and pea dot techniques.
LJBrooker
Whilst I appreciate the “better too much than too little” argument, there comes a point where 70% of what you’ve used is gonna come out the side, and end up where you didn’t need or want it. Take some of this odd, for goodness sake.
RoyRiver18
This is too much
DMurBOOBS-I-Dare-You
Your cousin applying a small amount of CPU to your thermal paste, you mean…
bamseogbalade
Missed a spot
frag_grumpy
CPU creampie
sirfannypack
Do people not do any research before building a computer?
Sithlord_3vil
I was waiting for him to do the rest of the board there for a moment
Fappopotamus1
TatteredPatches
Technique is fine, way too much of the juice.
pedro19
Ah well, I usually say that as long as it isn’t way to little or WAAAAY too much, it’s perfectly fine.
This will still work fine, just be a bit nasty when you eventually remove that cooler and have to clean dry thermal paste from everywhere. 😅
Leading-Leading6319
Naauuur.
Should’ve installed one of those CPU contact frames first.
Tbh I’d rather have THAT much than take my chances since it doesn’t even hurt the cpu
Edit: never mind, I rewatched it and took a closer look. That is a D E E P layer.
funyunrun
They do drywall for a living?
DuppyConqueror_
A dab will
Do ya….ooh my gawd.
THZHazzard
Needs one more layer to ensure efficiency .
Zeltar925
Way too much!!!!
mika_kplmn
Maybe add another tube? Doesn’t really look like it’s enough…
Kamelosk
Dude threw his cousing to get roasted 💀
Youssef_M_Mahmoud
there is a CPU on your thermal paste
tamal4444
He paid for the entire tube, He is going to use the entire tube.
DeadlyDragon115
why is it always the cousin doing stuff like this XDDD
NoShock8442
That’s wasteful
FellIntoFire
buyinggf1000gp
Applying mortar to the CPU so he can tile it later with beautiful tiles for a good looking build, I see
mvw2
Exactly how I like my CoolWhip.
The good part is too much doesn’t really make cooling worse. You can mainly only use too little.
44 Comments
That’s way too much and it’s gonna spread everywhere.
less paste, same way.
a bit too much, but in the end rly doesnt matter if u dont clean change your cpu every 2 weeks
While it won’t hurt anything, technically, that is a shit ton of paste.
Congrats on the new upgrade! As others have stated, that is too much thermal paste. But, you won’t have to worry about that until you eventually take the cooler back off.
Are you scooping ice cream or something?
What he do? Is a CPU, you not icing a cake!
It’s hard to believe this video isn’t just an elaborate attempt at trolling.
Is he icing a cake?
Spread method is the way but that’s a fairly thick coat and is going to ooze everywhere.
wasté of pasté
I mean, could’ve been better? Still not that bad. It’s better to overapply than underapply.
Bro is icing the cake.
That’s way too much, it’s a CPU not a birthday cake!
Only about 10x too much lol
he must be from the verge staff
Well, it’s always better to put on a bit too much than a bit too little…
It’s an older technique, the icing the technique, but very easy to over do. It might be better for something like a Threadripper or Xeon workstation CPU.
For most desktops, I do a mix between the X and pea dot techniques.
Whilst I appreciate the “better too much than too little” argument, there comes a point where 70% of what you’ve used is gonna come out the side, and end up where you didn’t need or want it. Take some of this odd, for goodness sake.
This is too much
Your cousin applying a small amount of CPU to your thermal paste, you mean…
Missed a spot
CPU creampie
Do people not do any research before building a computer?
I was waiting for him to do the rest of the board there for a moment
Technique is fine, way too much of the juice.
Ah well, I usually say that as long as it isn’t way to little or WAAAAY too much, it’s perfectly fine.
This will still work fine, just be a bit nasty when you eventually remove that cooler and have to clean dry thermal paste from everywhere. 😅
Naauuur.
Should’ve installed one of those CPU contact frames first.
Tbh I’d rather have THAT much than take my chances since it doesn’t even hurt the cpu
Edit: never mind, I rewatched it and took a closer look. That is a D E E P layer.
They do drywall for a living?
A dab will
Do ya….ooh my gawd.
Needs one more layer to ensure efficiency .
Way too much!!!!
Maybe add another tube? Doesn’t really look like it’s enough…
Dude threw his cousing to get roasted 💀
there is a CPU on your thermal paste
He paid for the entire tube, He is going to use the entire tube.
why is it always the cousin doing stuff like this XDDD
That’s wasteful
Applying mortar to the CPU so he can tile it later with beautiful tiles for a good looking build, I see
Exactly how I like my CoolWhip.
The good part is too much doesn’t really make cooling worse. You can mainly only use too little.
Well..it’s better than having too little
Hurts to watch