Hello, does my BIOS settings look ”normal” to you guys? Only thing that i have touched myself is the CPU Voltage and voltage off set value to 0.030, limited PL1&2 to 210 and put lite load to mode 7. Everything…
Hi guys, new ocer here, i did a oc to My 14900k to 6.0. wich temp should i watch out? I can see spikes of 86C but never a stable high temp like that on any other column. Are that…
Is overclocking gpu by this amount safe?
Hello, I am about to upgrade my PC. I love to overclock my hardware, the second I get my hands on the 14700K I will immediately get into overclocking it. I have this ancient 1000w modular corsair PSU that has…
Hi, I’ve OC’d my Q8300 to 3.0GHz on a GA-G31M-ES2L mobo following [this](https://www.youtube.com/watch?v=qmgjhtr392M) exact guide. The system works fine at 3GHz but there’s no ethernet or Wifi detected. Internet works fine when I put it back to 2.5GHz. I’d appreciate…
Hi guys. Recently built a system with 14900K, ASRock Z790 Nova motherboard and [*THIS*](https://www.corsair.com/us/en/p/memory/cmt64gx5m4b6600c32/dominator-platinum-rgb-64gb-4x16gb-ddr5-dram-6600mhz-c32-memory-kit-black-cmt64gx5m4b6600c32) 4 DIMM 6600 MT/s RAM which has 32-39-39-76 timings. Initially when I got the RAM, I plugged it in, turned on XMP, and the RAM passed…
My (finally) Stable 7800X3D 103 BCLK Overclock
My Ryzen 5800x cpu is unstable at 4.65GHZ at 1.4 Volts but the rated boost clock is 4.7. How is my cpu unstable below boost clock? I’m using Ryzen master and cpu temps are between 88-92C. Are temps the problem?…
12100F demon mode
I’ve searched countless guides/forums and even more videos trying to get a good overclock for my outdated chip. Many people experience steady frames after their overclock and i’m just not sure what exactly to change myself to get the 5ghz…
[https://www.youtube.com/watch?v=MYA-OoD-By4](https://www.youtube.com/watch?v=MYA-OoD-By4) I’ve used this to overclock my completely normal non-gaming AOC 2470W monitor to 75Hz from it’s normal 60Hz. Windows settings says it’s on 75Hz when I do the stuff mentioned in the video in CRU and HWiNFO doesn’t say…
My ram sticks are Corsair Vengeance 6000M/T’s Cl36 36/44/44/96 (CMH32GX5M2E6000Z36) ver. 5.33.01 … Thaiphoon burner says its Hynix A-die, and i already used Actually Hardcore Overclocking settings for them and they worked perfectly fine. In his last video he said…