After roughly 3 days of testing, I've broken through to an 11:19 fail. #6 error in test 7, of TM5 anta 777 absolut. I think I'm on the edge of stability now, I've loosened tWR to 18 and pushed VDIMM…

All done in adrenalin Gigabyte Aorus Elite rx 9070 xt

I'd like to know if any of these voltages are safe? I know VSOC is safe but worried about VDDQ and VDDIO, should I lower them to 1.3 even 1.25v? Temps are are, I'm worried about degration in mid term…

Thanks to all of you for the all the considerations that help me in increase my results.

Played around with the TDP and managed to beat out my old 5070 ti score in steel nomad in like 5 minutes. Only was able to get to about 7800 with the 5070 ti although it just goes to show…

So i have a i9 14900k with 8000mhz 38-48-48-100 lexar ram im trying to get tighter timings and reduce latency and best performance hopefully im new to ddr5 and im kinda stuck so any help would be great also 7400mhz…

I just opened my bios to look at something and seen all these weird symbols everywhere. Is my bios corrupted? What should i do? Flash it again to a previous one or replace the cmos battery maybe?

After days of lying to myself that an all-core -30/-25 Curve Optimizer setting was stable, I finally faced reality after a few random crashes during gaming and downloads. I decided to put in the work for a proper per-core PBO…

Do these scores seem low?

Hi, These are my current stable settings on my 9800X3D rig with 2×32GB Hynix A-Die dual-rank memory. Is it possible to tune this further? Is 2200 FCLK achievable on this motherboard and RAM combination? How would I go about achieving…

gflop fluctuations testing 3 different FCLKs (2133,2100 and 2167) i know more rounds with linpack are needed but even 6 rounds can show fluctuations semi acurately using 10gb option. Question, which fclk is each photo/result? https://ibb.co/vCxgWYxw https://ibb.co/p6XRDgGq https://ibb.co/Kp6Dqm3C

Thanks to all for your considerations about my results. It helps me a lot.