Hey Reddit. I think i've discovered the peak performance of my 9950x and my KF560C30BBEK2-64 kit. I am using a b850m-tuf motherboard. I cannot get 6400 mt/s or cl26 in 6200, nor 6000 to post below 1.48v VDD. Also, vsoc…
After quite a bit of testing, this is what I've landed on for now. If you're wondering why not 3733 or 3800, I'm 99% sure my FCLK can't do it after extensive testing. I thought I was limited by my…
Hello, I've been overclocking my RAM for the past couple of days. However, it keeps erroring always at about the 7h 46 minute mark on anta777 extreme. It doesn't error whatsoever on 1usmus v3 for 8.5hours. It also hasn't errored…
are this timings good for micron rev h vengeanze 2×8? what should i change for better performance?
I'm currently using a 32gb single stick hynix m-die. Is there anything blatantly wrong or anything I could easily improve? Thanks to everyone who's willing to lend a hand.
Made too 5% with my set up 7800x3d , 3080. Was playing around with pbo seriously for the first time tonight and did a + 200 all core and tired – 15,-20,-25 and no change in score but I am…
switched 9600x to 9700x same settings. how?
PC Config: ROG STRIX B650E-E (Updated BIOS) Ryzen 5 9600x (PBO, All Cores -30) Kingston Fury Renegade KF560C32RSK2-32 (A-DIE, Tuned using Buildzoid's Guide) XFX RX 9060XT (-65mv, 2718 Memory, +10%Power Limit) Kraken Plus 240 AIO (85% Fixed PUMP) High Quality…
What is the recommended calculation for Trfcsb? I got a BSOD (corrupted windows) and im assuming the ratio for my trfc2 and trfcsb is wayy off. This is hynix A die im running. Please also let me know if i…
I’m lowkey new to OC my ram and settings the timings lower. Is this any good? or is there anything I can improve?
I recently bought a : Ryzen 9 9950X3D Asus crosshair x870e dark hero And paird it with a G.Skill DDR5 Trident Z5 2x16GB 6400MHz CL32 F5-6400J3239G16GX2-TZ5K My overclock is: DRAM CAS# Latency: 30 • DRAM RAS# to CAS# Delay: 38…
Hi, I’m testing RDNA undervolting behavior on a compact, airflow-optimized setup. I have solid experience with RTX 5000 series UV, but RX 9xxx is new to me. The UV Profile: Voltage Offset: -80 mV Core Clock Offset: +100 MHz Power…