Did some overclocking and undervolting and did a stress test on Cinebench 2024 which gave the score of Multicore – 1300, Singlecore – 139….. and the image attached shows the sensor values by HWMonitor. Please tell me if these clock…
I’ve got two 32GB dual rank DDR5 DIMMs being cooled by a pair of 60mm fans, but one of them consistently runs 4–5°C hotter than the other in HWinfo. The hotter one is a bit closer to the CPU air…
Can this kit do 6400M/T@CL30 1:1, with tight timings easily?
I'm new to this so I'm not exactly sure what I'm looking at. gpu: nividia geforce 3070ti cpu: intel 11th gen 17 11700k power: tuf gaming 750 watt 80+ bronze
UPDATE 2: after running vram test for 50 mins i got 3 errors 1 at 30 mins and 2 and 48 and 1 at 54min and 1 at 55min and 1 at 58. So my gpu is broken? UPDATE: no…
Hi guys. I spent several days OCing my Hynix CJR c-die 32gb DDR4 ram. I used DRAM calculator as a baseline and came up with these numbers. Results are so so but I'm able to run the dram voltage at…
I've reached the peak
i am having a very weird problem with an old 1070 rog strix when the card is cold and boot to os it crashs after 10 min or 5min and cannot post again the only post solution is to turn…
Is 1.1097V still considered safe for VDDG CCD if temps are always under control (never exceeding 75°C under full load)? Don't mind the DRAM at 1.6V – it's B-Die running strong for over a year, temps stay below 33°C consistently.…
Hi. I've ran into an issue with my RAM during overclocking. 1x16GB 6000Mhz CL36 Kingston Fury paired with ASRock B650M-HDV/M.2 and Ryzen 7500F. I've tried to run timings similar to what Buildzoid was able to achieve here: https://youtu.be/4W3q0YzjQww?si=zhSyryuqAmxuP8OX&t=2434 6200Mhz CL30-38-38-30-68…
The same thing happens to me on hw monitor.
Hi All, I am going to nuke the above install as I have no use for it anymore, does anyone want usb drivers etc for a similar setup for running a newer ryzen cpu? Not sure if it's still the…