https://preview.redd.it/ygfamiqih0ye1.png?width=2289&format=png&auto=webp&s=16c0e1c7ad9dca3767dc394d5fd7dfd29586e3b2 RTX 5080 Vanguard SOC overclock on newest 576.28 drivers Core clock maintaining around 3200-3250MHz Mem 2250MHz Core +410 Mem +3000 Power limit 111% Fan @ 90% to prevent clock dropping Temp < 55c all run Prolly unstable AF Core…

So basically I did a 3DMark Time Spy benchmark on my 4080 Super (with a stable undervolt+memory overclock) and compared it to similar results. Found out it performs worse compared to most of the users with similar specs (even despite…

Hi all, I had my components tweaked and tuned and was wondering whether the voltage and temps look alright? Anything i need to be worries about?

These are the best stable values I was able to achieve with this chip.

Hello everyone! My build is an AsRock Deskmini X600, with Ryzen 5 8600G, Ram DDR5 Fury SODIMM CL38 6000MT/s. It is an office pc and I would like to optimize the configuration through the BIOS: obtain a stable undervolt and…

so im tryign to udnervolt my cpu but i cant get it to work in the bios can i also just do it via extreme intel tuning utlity if so how? mobo https://www.msi.com/Motherboard/PRO-B760-P-WIFI-DDR4

Are MCLK, FCLK and UCLK suppose to be like that? And the voltages? Just built a new system and am new to the AMD platform. The memory is Corsair VENGEANCE RGB DDR5 32GB (2x16GB) DDR5 6000MHz CL30.

I ran it stock and checked the max core clock it achieved and at what voltage. I increased the core clock by 150MHz, so it hit the max clock at the average voltage it's pulling and then made the rest…

This is my current stable setup, I tested it for 23 hours of tm5 and no errors. But now when i try to push it further to cl14 my bios gets corrupted. Trying to do rcd 16 gives errors after…

Ive been turning the timings down on this 4x8gb gskill ares 14-14-14-34 3200mhz ram, wonderimg what timings 8 should adjust next? Before you ask i tried very hard to get anything above 3600 stable but i get whea erros no…

So i ordered 50g of the thermal putty CX-H1300 of a swedish website that shipped it from china. This seems to me like ive been scammed, in no way is this 50g of putty? The box in itself cant weigh…

CPU is 9800X3D, completely stock, not even undervolted. GPU is Red Devil Spectral White, +10% power limit, 2800 mhz + fast timing VRAM and -120mv undervolt Ram is stock, running expo 1, 6000 mhz, cl28. 32GB, G.Skill Trident Z5 Royal…