Hello! So I was lucky and got some 64GB, CL 30, 6000mts ram before the prices went nuts. In attempting to get the fastest possible I just wanted the smallest CL I could find with the hope of 3D modeling…
At around 280W, the 9070 powercolor reaper flashed into XT performs around 22% faster on benchmarks, and 17% faster in rasterized games and 14% faster when ray tracing is on. -105mv undervolt, and 2800mhz default timings. (these are stable numbers…
Hey everyone. Good morning, afternoon, or evening. I’m pretty new to undervolting and I have a question about it. Can undervolting cause the kind of graphical issues I’m showing in the images? Right now I’m undervolting an RTX 3090 at…
I'm working on a modestly aggressive OC/UV on a 9950x3d and I have a secondary display that I use to keep abreast of my system stats with ADA64. Does anyone know if it's possible to monitor the frequency of CCD1…
9800X3D & X870E-E Gaming I have an effective custom loop setup for my 9800x3d. Temps have been staying pretty nominal for what these settings are. I wanted to increase the “MAX CPU Boost Clock Override(+)” setting to 225 but it…
3090 Back memory cooling solution
I shall call it: Solar Storm Flashed the 1000w lightning vbios(only get a little over 800) at stock voltage and no xoc memory. It did pretty well though. My card does not have any hardware mods done. It only has…
Is this a safe OC for an MSI gtx 1070 gaming x 8gb ?
So, I cannot tighten these turnaround timings. I've tried everything. They will not budge. Every time I see people sharing their Zen Timings results, they are able to run tRDRDSCL and tWRWRSCL at 4 and tRDRDSC and tWRWRSC at 1.…
CPU is currently running, PBO +200 Scalar x10 CCD0 -30 CCD1 -20 So far this is what I've accomplished, is there anything else I should do? Do i need to try raising vdd and vddq for anything worthy? My goal…
The system is stable under heavy load and stress tests, but I still get random crashes or resets during idle or light use. RAM temperatures look fine, so I don’t think this is a thermal issue on the memory side.…
Curious to see if i have something messed up and would like to get to cl 26. any help appreciated.