My 5090FE stock voltage to frequency curve seems to have lower values for frequency than many other 5090FEs. At 885mV im at 1665Mhz but I see a lot of other FE cards at 1737Mhz. All my nodes seem to be…
ASUS 5090 Astral OC Edition MSI MEG Ai1300P PSU – Using the factory included MSI 12VHPWR cable Had some time today to play with 3D Mark Nomad to to see what this 5090 can do and it looks like im…
My 9070XT Taichi was having very high Vram temps (98-100). So I decided to open it up and replace the pads along with the paste. TLDR : 2mm thick pads for the Vram, there are already pads for the PCB…
Need help with a good tune 7800x3d 6000cl30 Hi I was able to find a very good tune I think so far! ASRock b850 + 7800x3d + Corsair Vengeance M die 6000 cl30-36-36-76 Config: you can see at bios delta…
I have been spending this afternoon getting into overclocking manually for the first time and I'm kind of confused by the results i see on Furmark. Before i was just using the auto overclock in the Nvidia app and was…
In Time Spy I seem to peak at <2400 MHz GPU clock frequency, with 2296 MHz average frequency. When comparing to the #1 scoring(shunt mod) 5090 laptop their average frequency is 2814 MHz. That's almost at where this example of…
Hacking Memory & Reprogramming Motherboards, ft. AMD Engineer
Room for improvement?
I’ve got an Inno3D RTX3070Ti and I’m wondering if I should be ok using some liquid metal thermal compound on the gpu die? Here’s a pic showing the original thermal compound from the factory. I got some liquid metal thermal…
9950x3d After taking off the IHS I applied Liquid Metal to the die to remove the indium. I believe I let it sit too long and I can no longer wipe it off, completely solidified. Don’t really know where to…
I have a 7900xt that i just watercooled, and i ran 3d mark time spy on it. My clocks for the card seemed a lot lower than they should be, as in gaming (mw3 2 2023) I can hit upwards…
Hey guys, Need some guidance oc my 9800x3d on a fractal terra, it's got limited air cooling on thr rig itself but i do have a massive external fan blowing directly at the whole rig with all the side and…