Got an Aorus B450i motherboard recently and thinking of doing some overclocking. I've seen some comments online saying that the b450i VRMs get pretty hot. I'm wondering if I replace the large vrm heatsink with smaller ones with fins as…
Before and after shots of upgrading from 9600x to 9800x3d with same GPU: 5070 TI UC/OC: Goal was to have a quiet, cool gaming PC even in under load. CPU: +200mhz & -22 CO. GPU: 2940mhz @ 925mv +1600vram
I'm open to suggestions for improvement if anyone knows better timings or if its possible to tighten them for higher 0.1%s or lower latency. I'm just trying to exclude any kind of ram problem out of my new build. No…
I got wood parquet floor, is it safe to sit my pc tempered glass there ? Is tile floor the only one that is dangerous?
Basically, what plays a larger factor when it comes to errors and why? Pushing a gpu too far past factory clocks, or not being able to sufficiently cool it at those clocks? On the premise that power demand for the…
Any recommendations to improve?
Surprised to find the latest Nvidia driver has increased performance and stability
I think this is about the best I can get with my 6400cl28 setup – tRCDRD 36 errors immediately on TM5 and 37 errors after an hour or so, this did 3 hours of the ryzen3d TM5 and 2 hours…
I initially bought a used Asus Prime OC 5070 ti from a local retailer and I was thoroughly disappointed with its results. I'm not sure if there was something wrong with it, but the damn thing wouldn't even go over…
tCL 28 tRCDWR 36 tRCDRD 36 tRP 36 tRAS 36 tRC 38 "should be" something like: tCL 28 tRCDWR 36 tRCDRD 36 tRP 36 tRAS 64 tRC 100
I tested a range of different MSI Afterburner overclock/undervolt settings on my Zotac Amp Extreme Infinity 5070 Ti. The best parameters I found gave me +13% performance compared to stock. Methodology: On all tests, Memclock was set to +2000. I…
Got a stable 5200MHz clock on my 7800X3D stable with -10 to -25 PBO curve with a 1.03 BCLK. Saw a few examples of 5300 and 5400MHz clock 7800X3Ds and decided to try and up to 1.04 BCLK and +5…