(Intel Z890 Platform) 2x24gb @ 8000mts cl38-48-48-48-96 at 20k tREFI. These are Hynix die from corsair. I reach 54C during intense and long gaming sessions (4+ hours of 64vs64 rush in BF2042, it never goes beyond 54C). I have a…

I wanted to see if extreme cooling actually gives a real-world boost once you’ve already maxed out an air overclock, so I ran a straight stock, air, subzero comparison. Same four games tested at 1440p. 9700k and 3060Ti. A baseline…

Just curious about overclocking. I found out that I like to see my benchmark scores go as high as possible instead of actually playing on my PC. Is this also good for ram timings? My Gigabyte mobo has its own…

9800X3D | X670E-I | Teamgroup T-creator 6000 C30 16GBx2 (A die). Did a few preliminary testings, and everything looks pretty promising so far. Will need run a few more hours of Karhu/Memtest The most satisfying part is definitely the Vsoc,…

VDDP was lowered by only 5mv and VDD and VDDQ was set to 4.60V. I started this test at 4:40AM with an unlimited time and had a power outage at 2:50 PM. I was in another room and the power…

Someone was asking about my Aida64 Here it, what can be improved?

Strange marks appeared on my CPU dies

Was able to run a CL30 6000MT/s at a tighter 6400MT/s. This set is running a lot tighter than fist set, but struggling getting it past 6000, even with 1.5v+. Was wondering if there was a usual set of suspects…

Are there any egregious errors I need to fix in my timings? It's a G.skill DDR5 6000 CL30 dual rank M-die kit, X870 Tomahawk, and 9800X3D with a +200/-30 PBO. So far I've just tested in Aida64 for a couple…

How does it look? What can I change?

I delidded and attempted to direct die cool my 9950x3d, however I have had a constant stream of issues with the cpu and stability and I'm looking for help. The cpu has issues with any ram at any speed. I've…

so I've been having a multitude of frequency annoyances recently but this one I can't figure out. Why does 14900k with 253w power limit 400amp iccmax power throttle in intel xtu stress test at 200-220w 60-70c with no current/edp warnings…