–17C loop, +466 MHz, no LN2. Just coolant and chaos. Full breakdown’s on YouTube (TrashBench).
I don’t notice any performance or hating issues. Everything is good and almost silent but this spike worries my gpu
made sure to remove all power limits and i am overclocking a 14900k with AC_LL voltage , running direct die waterblock under a loop , it pulls 400w's cpu temps are 80c , and one minute in it throttles ,…
KingBank 7200 MT/s CL34 (UDIMM) @ 10000 MT/s. It's probably not going to end well…
I did it. Huge thanks to u/ElectronicHair2283 for the tip about mini heatsinks, the SPD HUB temperature dropped from around 50 C peak to ~47 C. Approximate size for Hynix A-die is 9x9x5 mm, you can go a bit larger,…
I have a setup with: • Motherboard: ASRock B450 Pro4 • CPU: Ryzen 7 5700X Should I be able to squeeze more performance out of this RAM, and should I disable the XMP profile? The CPU is undervolted between -20…
Hello, I'm wanting to do a bios flash on my 2080 Ti Twin Fan Specs ZOTAC RTX 2080 Ti Twin Fan. I'm just wondering if anyone has done it with this model or if it's even possible. Any help would…
I am currently using 6600mhz Cl32 with 1.35v
So, I took a Maxsun B580 iCraft and ran it like it owed me money. Using a 3D printed mount for an LGA1156 CPU water block, I ran automotive coolant through it sitting at around –15C, and pushed voltage from…
WireView Pro II launches at $140 with color display and cooling fan for 12V-2×6 GPUs
Could someone help me improve the latency of my ram, what values do you recommend?
All scores achieved on bone stock Astral, Air cooled , ambient was 66f, with an AC For Nomad .985 @ 3165 curve for speedway and port royal, 1.050 @ 3330 Steel Nomad https://www.3dmark.com/sn/9482580 Port Royal https://www.3dmark.com/pr/3691593 Speedway https://www.3dmark.com/sw/2837956