Hi everyone, I recently purchased a brand new tube of Arctic MX-7 from a reputable local distributor to repaste my Steam Deck. When I tried to pump it out, the paste was literally as hard as a brick. It came…
This did actually drop the temps by 8-12°C when running i5-8600k @ 5ghz
I don't get why core 0 and 2 are running 3520 despite being set to run 4375 and the rest are behaving normally? Is this a user error (Never used ryzen master) or is something broken
Hello, I would like to know your opinion on the results of the two benchmark tests I ran on 3DMark. I see that in both cases I am below average: does this mean my components are less performant than normal?…
Intel Core i9-14900KF reaches 9.2 GHz in new CPU frequency world record
A colleague here in the community said that the FCLK would stabilize with lower voltage, I thought, "then I'll test it" so now there's proof that we got it to an incredible 2233mhz with 1.15v.
Hey everyone, After a lot of fine-tuning, testing, and chasing the perfect stability for low-latency gaming, I finally locked in my daily profile on the Ryzen 7 9800X3D and ASRock X870E Taichi. I was aiming for the absolute sweet spot…
Got tired of chasing dreams with my mid binned 9800x3d. This one only does 8200 but 2233 fclk seems possible. Both linpack and ycruncher are showing no regression or stability issues so far. Still not done yet. 1.15v soc 1.45vddio…
Running Hynix M-die sticks with TREFI at 150000. Test mem 5 is very stable running ansa Absolut. Any advice on my timings would be greatly appreciated.
I've decided to finally take the time and set up my per core undervolt. I've attached the results and performance gains compared to PBO+200, Scalar 1x, -20mv all core undervolt. I've ended up as follows (strongest to weakest core -…
My gtx 1660 with a stable 0 artifacting overclock and 40% voltage increase runs at a cold 51°c after 1 hour of stress test FPS is low since almost all vram is being taken up in the stress test What…
DDR5 Dual-Rank Hynix O-die 6200 MT/s 28-30-35-32-48 FCLK 2066.67 MHz I think this is the “sweet spot” for non-EXPO systems. Sometimes I wish I had a GPU powerful enough that would let me stress my CPU/RAM a bit more.