Finally got parts to do my HK IV Pro AM4 compatible. 5070 Ti is on air. Running -30, 2100fxlk, 8400mhz, 3180 on the 5070Ti. Can I get guidance to men OC on DDR5 with this chip? Using GB Auros Elite,…

Running pbo made the cpu run a little warmer then I’d like so I decided to run default settings and these are the results.

also, the numbers aren't on purpose, what are the chances lol First time doing any gpu tuning as well

Hi, looking for advice on trying to get these sticks of ram to be able to run at 8000mhz cl38. These are f5-6400J3039G16GX2-TR5ns (6400mhz 30-39-39-102 1.40V) which I believe are SK Hynix A-die 16gb single rank. 6400mhz refuses to be…

My RAM is rated at 6000 MT/s, but AI Snatch bumped it up to 6200 MT/s. Could this damage my RAM? RAM kit: AX5U6000C3016G-DCLARBK

first time getting into DDR5 OC. using hynix A die. curious if there are any low hanging fruit that i have missed that ought to stabilize lower than the value i have set here. i know some of my primaries…

I have a asus dual 4060 oc with a 850w psu and im trying to overclock and undervolt my gpu but i dont know if im doing the right thing or notI have an Asus Dual 4060 OC with an…

I just released the (hopefully) final version 0.11.0.0 of CoreCycler: https://github.com/sp00n/CoreCycler/releases Version 0.11.0.0 offers support for Ryzen 9000 for the Automatic Test Mode, and has replaced the outdated WinRing0 system driver with a version from PawnIO. To be able to…

The RAM tuning continues – I managed to tighten the timings even further and bring tRFC(ns) down from 166. I also got tREFI dialed in, and everything seems to be holding up well at reasonable voltages. So far the profile…

Due to ram pricing I'm still using the ram from my intel build which is a 7200 cl36 corsair platinum kit, followed BZ guide and ended up with this which is tm5 stable for 6 hours, does anyone with more…

Well, after holding out for about 5ish years I'm fully upgrading my system from 10900k + 3080ti to a 9950x3d + Asus 5080, on an Asus x870e Crosshair Apex, 1300w MSI MEG psu. I've been looking around at OCing videos…

Why is the GPU not using the clock and voltage as set via the curve but instead stays slightly below it? If i set a Curve of 3100 at 975mv i'd expect the card to run at 3100mhz and not…