Idk anything ab overclocking can sum1 tell me if this is good or bad?
What else can I do to optimize the performance of this RAM module? my ram is klevv bolt v 2×16 6000c30 hynix a die
I’m able to pass 8h TM5 anta777 Absolut no problem but it fails in 10 minutes RTP. I think I may be on the fine edge from stability but I can’t figure it out. Any advice on how I should…
No matter how hard I try, I can't seem to get my RAM timings right. After I adjust the settings, my PC refuses to boot, and I have to reset the BIOS every single time. I'm specifically trying to lower…
Update on the saga of achieving a good result: I believe this is the turning point of my setup. Thanks again, Buildzoid and Dirtcompactor for helping me tame this system.
I have a Corsair Titanium 6000 64GB kit. Is there any timing worth improving than what I have? Right now, I'm testing tras 30 and trc 64 from tras 126 and trc 68. Is it worth using anything other than…
My first PC build, is this latency really bad? Ive tried a bunch of bios settings that I've read online to improve it, but I cant get it to drop below 84. Same number in safe mode and all applications…
Hey guys, this is my first attempt at tuning my 64gb G.Skill kit. This is as far as I have gotten. I would greatly appreciate any feedback regarding tuning this 64gb DR kit.
Thank you Buildzoid for helping me fix the errors and get my 6000MHz CL 26 + GDM OFF and FCLK 2200MHz stable.
How to overclock a CPU to 5.9 GHz at 1.250V like the guy in the video? https://youtu.be/VC76en8PTJY?si=M8CExRkB29J6T87o
I recently remembered about overcloking and tried it out I undervolted and overclocked my 5060 base from my Lenovo prebuilt (I know not the best) stock voltage was 1.075mv And max GPU clock set at 3000mhz I undervolted to 1.025mv…
After much persistence and trial and error, I managed to achieve this result. I tried GDM off, but no matter what I tried, nothing stabilized it at 6000 cl26, so I gave up and ended up opting to squeeze what…