Noob here, Hynix M die. I know my secondaries are loose and my primaries could be tighter as well. Got this stable for 11 cycles TM5 DDR5 Ryzen3D@anta777 config. This is only my 2nd real attempt at ram overclocking, where…

hi, had an asus mobo, became faulty, swapped with a gigabyte, same fans, fan curves, case, setting, etc. now my ram gets to 75c or more if i let it when running OCCT after 5min, it only happens after enabling…

what should i change so i can get most out of my cpu safely

This is my current stable settings for 8000 CL34 and I’m trying to tighten it to get it below 64ns latency. I’ve tried lowering tRRDS/tRRDL to 7, tWTRL to 15, tRTP to 10, however I’m getting late errors hours in…

My specs 14900hx + 24*2 Hynix Mdie 5600 stock. I’m not trying to OC to a very high frequency or some I just wanna eliminate 0.1% low stutters Picture shown is stock setting of my ram, I only changed 3…

My third post in my all core OC adventure lol. So last week I started tuning my 9800x3D trying to see how far I could get the chip all core, you may have seen my posts. At first I got…

MSI Made Their Own “RTX 5090 Ti”, 1000W GPU

Hello guys, i was doing some Heaven benchmarks, because i wanted to undervolt my 3080ti. While doing it i have seen that my hotspot temperature is really high, compared to the other temperatures on the gpu. I guess the gotspot…

The craziest GPU on the planet..

Used 2x 600 grit sandpapers and 3x 1k grit paper. cpu is e5 1660 v3.

Any improvement you guys can see? I used 2x 600 grit papers then finished it with 1k grit.

Hi all. This is currently the Kit I am using and I feel like I can get more out of it. Ny current rig is as follows: 14900KF Asus Apex Encore Mobo 5090 Astral LC 1200w PSU Thing is, I…