Hi, first of all sorry for not fully english HWInfo but i didn't even consider i would write this post…. Y-cruncher vt3 passed for 50 iterations (1,5h) but as we can see this isn't a stable oc, most of it…
Yes, this is a world record, i have the third best binned V1 ever 2.6x stock (1020->2601MHz) Done on the more inefficient Erista model which is built on 20nm instead of Mariko that is built on 16nm No, i can't…
Got a stable 4.7 but honestly i feel like something is off compared to previous configs, im new and its hard to put my finger on, anything look ireggular? like the power? Prime 95, regular day dasks, and gaming loads.
What you think? too radical? im importing this fan curve that was running for 6 years on a 16 series gpu. Now im wondering if its better rethink the curve for my RTX 50 series. i really dont like the…
Am I missing something? I copy the instructions to a T but not getting the same result as what's shown on his screen? If you can't tell, I'm brand new to this! Any ideas? Thank you.
This is my first in depth attempt at fully manual timings, and spent weeks saving profiles and finding out what is needed for low timings, then what was needed for GDM disabled for true 1T. But yesterday I finally found…
Recently i upgraded from intel core i3-9100f (asrock z390 phantom gaming 4s) to ryzen 7 5700x (msi mpg b550 gaming plus), and decided to overclock processor, the final result is 4.7ghz 1.4125v(LLC mode 3), i use air cooler, in games…
This is what I ended up with for a final set of timings on my Hynix M-die cl36-38-38-76 6000MTs kit paired with 7800x3d on an asrock b650m-cw. I got it down to 61.7ns in OS off clean boot and 60.6ns…
Hi everyone, I’m looking for some advice about my Sapphire RX 6900 XT Nitro+ SE temperatures and hotspot. I’ve attached HWiNFO screenshots with all the sensor data. Current undervolt: • 2409 MHz @ 1090 mV (Stock is usually around 2509…
So, I did an undervolt on my 5080 and I was able to achieve 9.5k in Steel Nomad which is more than what I could get with my overclocked profile which sets the clock speeds at almost 3.2ghz at 400w.…
What else can I do to squeeze performance out of my ram (I know my VSOC is pretty high but its always unstable if I lower it more)
Currently stable at 6200 1:1 CL28 on 64GB. AIDA latency is around 72ns. What timings should I focus on to realistically push this under 70ns? Already stress tested (OCCT/TM5) and stable.