Anything I can do here to improve stability and latency?
I went to undervolt my three year old 4080 and noticed that at full load, my GPU was hitting hotspots of 110 degrees, despite only pulling 190W. Opened it up to repaste it (because that's what I THOUGHT the problem…
Though id share some of my builds throughout the years. I don't really have any photos from the late 90s to 2010ish time and didn't take photos of some along the way but here we go. Due to the 20-photo…
I’ve had the itch to rebuild my loop and I am going to change the pads/paste on the alpha cool block as it appears there might be a slight warpage from the pads. Shall I use Thermal Grizzly Phase Sheet…
Check out my setup — ignore my cat 🤣
32gb dual rank b-die, does this look good or am i missing something? Running 1,5V on the dimms and 1,13V soc
After 8 years I decided it was time to retire my old pre-built PC and chose to build my own PC this time around! Thoughts?
I've tried everything to kill this CPU, but it's still holding up at 129°C lol
Hello r/overclocking, Today before shuting down my pc i decided to check HWinfo, and what i found is CPU temp (die) peaked at 95 degrees, even though other temps shows 64, and even the motherboard readings shows 64 as max…
Some quick testing showed no errors but haven't tested it thoroughly yet.
My first build
Open frame > Fishtank Change my mind PCPartPicker Part List Type Item Price CPU AMD Ryzen 5 9600X 3.9 GHz 6-Core Processor $189.00 @ Amazon CPU Cooler Deepcool ASSASSIN IV 79.1 CFM CPU Cooler – Motherboard Asus ROG STRIX B650E-I…