So these past few days I've been fine tuning my system, I've been undervolting, overclocking, adjusting fan curves etc. I usually just do these things only for CPU/GPU but this time I wanted to get into the world of RAM timings for the first time, so here is what I've changed so far:
tREFI= 32768
tRFC= 420
tRFCsb:= 340
Memory Controller= 1.3V
VDD and VDDQ= 1.25V
SA= 1.1V
Are these settings ok? I'm open to any tweaks you guys have on my first try at timings. Oh btw I'm running dominator titanium DIMMs at 6200MT/s, haven't really tried to push frequency in any way, just messing with basic timings this time.
My question is about temperature, before these settings I was playing with max tREFI and even 50000 to let the timings get a bit loose but I was getting quick TM5 errors with those, related to temps mostly so I lowered tREFI and VDD/VDDQ in hopes to get the temps more in check and I'm still getting into high 50s low 60s territory under stress tests.
Apparently no errors so far so I think my undervolt and timings are stable with 90% confidence, I ran memtest for 4 hours flawlessly, then got into a 2 hour run of TM5 on the Intel DDR5 anta777 profile, that went through smoothly too, and now I'm running y-cruncher FFTv4 for an hour as I already did an hour of VT3 with no errors. All tests besides memtest were ran alongside furmark to let my RAM soak as much heat as possible to simulate gaming/real world scenarios.
Are these temps ok to run? I mostly see these numbers on synthethics only but its still concerning a little bit, I have a couple spare 120mm fans that I could somehow mount to the ram to help with temps, with my vertical GPU I can't really fit a cooling module so I'm also open to ideas on how to mount a spare fan to my memory.
I'll link a couple pics of my rig and hwinfo screen so you guys can see it better, sorry about it being a photo I'm currently running y-cruncher so I can't really get a screenshot.
I really appreciate any thoughts about this, thanks š