I have this kit of 3733cl17 patriot ram with hynix cjr dies.
I got this far but theres a lot of conflicting information on the internet and Im having a little trouble getting it fully stable. It finished anta777 extreme with just one error.
I've following findings:
-
The kit scales with voltage way past 1.45v. Im not willing to push it past 1.5v but I think it could do cl14 with (a lot) more voltage. CL15 needs 1.47v to be stableish.
-
The kit is very, very sensitive to temperature. Without a fan blowing air on it it throws errors at anything tighter than XMP. I think the error in memtest could be due to that.
-
Despite pretty tight timings AIDA latency seems kinda high. Im not using a stripped down windows or safe mode. This is a normal windows 11 install with useless crap running in the background.
-
tRFC boots down to ~440. tRC doesnt boot below 56. tRAS doesnt matter. tRTP can go down to 5 and be stableish. I assume more voltage would stabilize those timings but with increased heat output. Probably not worth chasing considering the errors at current timings. Also tRCDRD 19 requires GDM.
-
FCLK 2000 is unstable with my 5700x3d so higher frequencies are not worth chasing.
Im not a very experienced overclocker. Some of the timings might not make sense. Ive been looking at other cjr ocs and some random bits of knowledge here and there. Id appreciate any input on how to make the oc better.